FELLOWS 10-4기어 샤프너

ID#:313271
상표:FELLOWS
모델:10-4
형태:기어 샤프너
조건:중고 - 우수
년도:1980
위치:Connecticut
미국
환불 정책:30-일
Stock # :10-4x4
가격:

투기

Lower:23
최대 기어경:10 "
치수:L 91" x w60" x H91"
Upper:43
무게:12,000lbs
제어반:CNC (18imb5)

FELLOWS 10-4 FOUR AXIS CNC (FANUC) SHAPER
The machine has been 100% remanufactured as follows:
Both upper and lower worms and wheels will be inspected, replaced if necessary and adjusted for proper back-lash and bearing pattern.
Cutter spindle bushing will be refit to factory specifications
All bearings, seals and belts will be replaced with new components that meet or exceed factory specifications.
Relay electronics will be upgraded to a state of the art Fanuc Model 18IMB-5 four axis controller with color display.
The hydraulic infeed system will be replaced with a ball screw and AC servo motor.
The hydraulic and lube system will be combined into a single compact unit integral with the machine.
Work table ways will be re-ground and the table hand scraped for proper bearing patterns
All parts will be inspected and replaced when necessary
Machine will be striped, cleaned, body filled and painted

This FELLOWS 10-4 will be capable of performing with in the original manufactures precision parameters when the machine was delivered new.

PRINCIPAL SPECIFICATIONS
Maximum Pitch Diameter (External)……..……………………….………. 10”
Maximum Pitch Diameter (Internal)……..………….…………………….. 10”
Maximum Face Width, External & Internal……………………….………. 4”
Maximum Diametral Pitch, Spur …..……………………………………… 4DP
Maximum Diametral Pitch, Helical……..…………………………………. 5DP
Bore Through Work Spindle………………………………………………. 5.875”
Cutter Spindle Diameter………...…………..…………………………...… 3.543”
Maximum Helix Angle With Special Guides……………………………… 45 deg
Distance Between Work Table and Cutter Spindle ……………...…..……. 10”
Maximum OD of Fixture…………………………………………………... 19”
Dimensions
Length……………………………………………………………… 91”
Height………………………………...………….……………….... 91”
Width…………………………………………..………………….. 60”
Machine net weight, approx…………………………………….……..…… 12,000 lbs.

STANDARD EQUIPMENT:
Standard straight spur guide
15 Hp AC main drive stroking motor. Stroking speed from 50-400. Other SPM available upon request
Programmable 15Hp AC variable drive to control stroking speed.
480VAC 3Phase 60HZ 60Amp Power
The CNC will control the following axis:
Work table rotation (no change gears required)
Cutter spindle rotation
Work table infeed
Cutter spindle stroking speed
Centralized auto lube that is continually monitored by the computer
Machine comes as a complete unit and requires minimal setup (power, oil and coolant).
Coolant sump in base
Removable chip basket
Crowning feature via back off cam
Fully air-condition electrical cabinet
Cutter elevation

PROGRAMED FEATURES:
CNC controller has Macro screens for “Operator friendly” question and answer setups. NO PROGRAMING NEEDED.
One to four cut selected by CNC controller
Each cut has individual parameters for:
Depth of cut
Infeed rate
Stroking speed
Rotational feed rate
Degree of work rotation
Setups can be stored in nonvolatile memory using a setup number between 1-9999
Recut mode allows the operator to bring the part into size without changing the programed parameters.
Optional hydraulic clamping and tail stock can be automatic or manually controlled

OPTIONAL EQUIPMENT
Hydraulic work clamping
Tailstock (fixed or swing away)
3” additional riser. 24 5/8” casting. 13” from top of table to cutter spindle
6” additional riser. 27 5/8” casting. 16” from top of table to cutter spindle
7” Throated riser (35” swing diameter) 17” from top of table to cutter spindle
9” additional riser. 30 5/8” casting. 19” from top of table to cutter spindle
12” additional riser. 33 5/8” casting. 22” from top of table to cutter spindle
Tilting Table: allows face gears to be cut at 90º (±10º) and tapered gears at15º 
Stroke length extended to 5” or 6”

True stroke positioning 2” of travel
Full Enclosure
Chip conveyor belt

WARRANTY:
One year warranty on parts and labor. Machine to be supplied with unconditional 30-day money back, return privilege warranty. Warranty is not transferable.
Second year warranty can be purchased.

세부내역

This Fellows 10-4 was completly remanufactured in 2014. The machine is equiped with a brand new Fanuc CNC controller. The machine can cut 10” max pitch dia (internal and external) with a 4” face width and max 4DP for spur gears. With the CNC control the machine does not need change gears, simplifing the setup.

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 FELLOWS 10-4, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..