LANDIS 1R범용 원통 연삭기

ID#:340347
상표:LANDIS
모델:1R
형태:범용 원통 연삭기
년도:1982
판매자:판매자가 누군지보기 ...
위치:New Jersey
미국
Stock # :1975
가격:

투기

Lower:30
스윙:254 mm
중심:508 mm
동력:3.7 kW
워크헤드 모터:0.2 kW
작업헤드 스핀들 속도:600 RPM
Upper:50
연마 휠 직경:304.8 mm
플런지(예/아니오):Yes
치수:8'L x 4'D x 6'6"H
무게:4150 lb.

1-(used) Landis Model 1R 10" x 20" Universal Cylindrical Grinder, new 1982.

SPECIFICATIONS:
Nominal swing over table.................................... 10"
Maximum swing over table................................ 10-7/8"
Nominal distance between centers............................ 20"
Hydraulic table traverse......................... 2" to 240" ipm
Traverse per turn of handwheel........................... 0.200"
Traverse handwheel graduations........................... 0.001"
Swivel table graduated.................. 20 degrees, 4" per foot
Dimensions (approx.).......................... 8'L x 4'D x 6'6"H
Weight (approx.)...................................... 4,150 lb.

WHEELHEAD:
Wheelhead swivels left & right of center................ 90 deg.
Wheel size......................................... 12" diameter
Maximum width, full wheel.................................... 3"
Maximum hydraulic infeed - on diameter................... 0.090"
Rapid infeed stroke.......................................... 1"
Minimum feed graduations - on diameter................ 0.000050"
Work diameter reduction per revolution of
handwheel.............................................. 0.100"
Work diameter reduction per revolution of
fine feed knob......................................... 0.001"
Wheelhead motor............................................ 5 Hp

WORKHEAD:
Workhead swivels toward wheelhead.................... 90 degrees
Workhead swivels away from wheelhead................. 30 degrees
Workhead spindle speeds (6)....................... 60 to 600 rpm
Workhead spindle nose..................................... A2-5"
Workhead motor........................................... 1/4 Hp

EQUIPPED WITH:
Hydraulic table traverse
Automatic infeed @ table reversals
Automatic plunge feed
Power rapid wheelhead advance & retraction
Sparkout timer
Live spindle headstock
Universal wheelhead and universal workhead
12" diameter x 3" width x 5" bore grinding wheel
Hard film microsphere wheel spindle bearings
Coolant system
Carriage and wheelhead ways are automatically lubricated
Machine motors are wired for 3/60/220-440 volt operation

http://www.agreenco.com/Landis1R-1975.html

세부내역

Landis Model 1R 10" x 20" Universal Cylindrical Grinder, With 12" Wheel, 5Hp, Hydraulic Table Traverse, Automatic Infeed, Automatic Plunge Feed, Power Wheel Positioning, Sparkout, Live Workhead Spindle, Micro-sphere Bearings, Coolant System, new 1982.

http://www.agreenco.com/Landis1R-1975.html

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 LANDIS 1R, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..