KURAKI KH-80수평 머시닝 센터

ID#:342589
상표:KURAKI
모델:KH-80
형태:수평 머시닝 센터
조건:중고 - 좋은
년도:1990
제어:CNC (Fanuc 15M)
판매자:판매자가 누군지보기 ...
위치:Massachusetts
미국
환불 정책:있는 그대로
Stock # :2010
가격:

투기

Lower:52
X:1,100 mm
Y:800.1 mm
Z:749.3 mm
동력:11.2 kW
분당 회전속도:4500 rpm
# ATC:40
팔렛-폭:800.1 mm
Upper:72
팔렛-길이:800.1 mm
테이퍼:CAT-50
#축:4
치수:174"W x 221"D x 129"H
무게:39,600 lb.
제어반:CNC (Fanuc 15M)

1-(used) Kuraki Model KH-80 CNC Horizontal Machining Center, New 1990.

SPECIFICATIONS:
Longitudinal table travel (X-axis)............................ 43.3"
Vertical spindle head travel (Y-axis)......................... 31.5"
Cross column travel (Z-axis).................................. 29.5"
Spindle centerline to table top (min/max).............. 1.9" / 33.5"
Spindle nose to table centerline (min/max)............. 9.8" / 39.4"
Table working surface................................. 31.5" x 31.5"
Min. table index angle................................... 0.001 deg.
Max. table load........................................... 3,300 lb.
Spindle tape................................................. CAT-50
Spindle speeds....................................... 20 - 4,500 rpm
Cutting feeds........................................ 0.04 - 197 ipm
Rapid traverse (X&Y/Z).................................. 590/472 ipm
Max. tool size (diam / lgth)........................... 4.3" / 15.7"
Max. tool weight............................................. 44 lb.
Spindle motor (cont./30 min.)............................ 14.6/20 Hp
Electrics............................................. 3ph/60Hz/220v
Dimensions (approx.).......................... 174"W x 221"D x 129"H
Weight (approx.)......................................... 39,600 lb.

EQUIPPED WITH:
Fanuc 15M CNC Control w/ 4th axis, RS-232 & Remote MPG
AC servo-motors
40 Station automatic tool changer
Twin pallet changer
Dual 31.5" x 31.5" pallets with drilled & tapped subtables
Spider Cool programmable coolant nozzle
Dual chip augers (front & back)
Chip conveyor
Spindle oil cooler
Full enclosure
Manual
Staging

세부내역

Kuraki Model KH-80 CNC Horizontal Machining Center. With Fanuc 15M CNC Control with 4th Axis, Remote MPG and RS232, Fanuc AC Servo-motors, 43.3"X, 31.5"Y, 29.5"Z, Dual 31.5" x 31.5" Pallets with drilled and tapped sub-plates, CAT-50 Taper, 4,500 RPM, 40 Station ATC, Spider Cool Programmable Coolant System, Full Enclosure, Twin Chip Augers, Chip Conveyor, Spindle Oil Cooler, Staging, New 1990.

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 KURAKI KH-80, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..