GLEASON 116베벨 기어 생성기

ID#:344986
상표:GLEASON
모델:116
형태:베벨 기어 생성기
년도:1997
위치:Michigan
미국
Stock # :10620
가격:

투기

Lower:94
최대 기어경:18 "
형식:Rougher/Finisher
치수:126" x 102" x 84"
Upper:114
무게:24,000 lbs
제어반:CNC (Fanuc 18T)

EQUIPPED WITH:
Fanuc 18T
Enclosed Guarding
Hydraulic Clamping
6 Axis DRO
Coolant System
Stock Divide
Magnetic Chip Separator

SPECIFICATIONS:

WORKPIECE CAPACITY:
Automotive Version (Jobbing Version)
Y Extreme Ratio: 4:1 (10:1)
Y Cone Distance: Max (30 Deg. Spiral Angle & 12" Dia. Cutter: 7.40 (9.00")
Full Depth, Maximum: 1.00"
Face Width, Maximum: 2.30" (2.750")
Range of Tooth Numbers: 5 to 150 Inclusive
Maximum Gear Pitch Dia. of: (18.00")
Typical 30 Deg. Spiral Ang.: 14.00"
Gear Using 12" Dia. Cutter: 14.00" (16.00")
At The Following Ratios: 10.50" (12.75")
Diametral Pitch (Coarsest): 2.00"

MACHINE SPECIFICATIONS:
Machine Center to Nose Of Spindle: 2.50" to 13.50"
Root Angle: -12 Deg. to 66 Deg. (-12 Deg. to 90 Deg.)
Sliding Base: Withdraw 2",Advance 3"
Vertical Offset: 4.50" Up and Down
Cutter Spindle Rotation Angle (Tilt): 0 Deg. to 180 Deg.
Swivel Angle: 0 Deg. to 355 Deg.
Eccentric Angle: 0 Deg. to 160 Deg.
Cradle Angle: Deg. to 180 Deg.

AXIS SPEEDS - MAXIMUM:
Y Cutter Spindle: 115 RPM

WORKSPINDLE DIMENSIONS:
Diameter of Tapered Hole at Large End: 3 29/32"
Taper Per Foot: 39/64"
Depth of Taper: 6"
Diameter of Hole Through Spindle: 3 1/16"
Diameter of Spindle Nose: 5 1/2"
Length x Width x Height: 126" x 102" x 84" (Width can be adjusted to 90")
Weight: 24,000 lbs

세부내역

Immediately Available, 18" Maximum Gear Pitch Diameter, 2.3" Maximum Face, Equipped with Fanuc 18T Control, Enclosed Guarding, Hydraulic Clamping, 6 Axis Digital Read Out, Coolant System, Stock Divider, Magnetic Chip Seperator

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 GLEASON 116, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..