SHIZUOKA SV-4024수직 머시닝 센터

ID#:346110
상표:SHIZUOKA
모델:SV-4024
형태:수직 머시닝 센터
조건:중고 - 우수
년도:2000
제어:CNC (FANUC 18iM)
판매자:판매자가 누군지보기 ...
위치:Wisconsin
미국
Stock # :12,000 RPM
가격:

투기

Lower:16
X:1,016 mm
Y:609.6 mm
Z:508 mm
동력:14.9 kW
분당 회전속도:12000 rpm
# ATC:24
테이블 W:609.6 mm
Upper:36
테이블-L:1,219 mm
테이퍼:CAT-40
#축:3
치수:145x102x110
무게:17000
제어반:CNC (FANUC 18iM)

DATE OF MANUFACTURE 2000
TABLE SIZE 47" x 27.6"
MAXIMUM PALLET LOAD 2,205 LBS
SPINDLE NOSE TO PALLET TOP 5.9" - 26"
X AXIS TRAVEL 40.2"
Y AXIS TRAVEL 24"
Z AXIS TRAVEL 20.1"
RAPID TRAVERSE RATE X & Y AXIS 1575 IPM
CUTTING FEED RATE 0.4 - 630 IPM
SPINDLE TAPER CAT 40
SPINDLE SPEEDS 100 - 12,000 RPM
SPINDLE MOTOR 30 HP
TOOL CHANGER CAPACITY, SIDE MOUNT 24 (SWING-ARM CAM)
SLIDING DOOR OPEN WIDTH 50"
MAXIMUM TOOL WEIGHT 17.6 LBS
WEIGHT, APPROX. 17,000 LBS
DIMENSIONS, APPROX. 100"L x 103"W x 117"H

Equipped With:
FANUC 18i-M CNC CONTROL w/9" MONITOR,
RS-232C PORT INTERFACE FOR DNC OPERATION,
RIGID TAPPING (SYNCHRONOUS TAPPING / SOLID TAPPING),
CHIP BLASTER COOL-THRU-SPINDLE UNIT (2000 PSI),
(2) TURBO REAR DISCHARGE CHIP CONVEYORS,
KAMUI SPINDLE & OIL CHILLER,
REMOTE PULSE GENERATOR HAND-WHEEL,
SIDE MOUNTED AUTO-TOOL CHANGER (SWING-ARM CAM),
COOLANT SYSTEM WITH TANK & PUMP,
FULLY ENCLOSED GUARDING, ALL AVAILABLE MANUALS
****RIGID BOX WAY CONSTRUCTION****
*******30 HP HIGH-SPEED SPINDLE*******
***********A QUALITY JAPANESE MACHINE TOOL************
See More at www.mwmachinery.com

세부내역

SHIZUOKA SV-4024 CNC MILL, FANUC 18i-M, 40 x 24 x 20, 30 HP, 12000 RPM, COOL THRU SPINDLE, 24 SIDE TOOL CHANGER, BOX WAY

DATE OF MANUFACTURE 2000
TABLE SIZE 47" x 27.6"
MAXIMUM PALLET LOAD 2,205 LBS
SPINDLE NOSE TO PALLET TOP 5.9" - 26"
X AXIS TRAVEL 40.2"
Y AXIS TRAVEL 24"
Z AXIS TRAVEL 20.1"
RAPID TRAVERSE RATE X & Y AXIS 1575 IPM
CUTTING FEED RATE 0.4 - 630 IPM
SPINDLE TAPER CAT 40
SPINDLE SPEEDS 100 - 12,000 RPM
SPINDLE MOTOR 30 HP
TOOL CHANGER CAPACITY, SIDE MOUNT 24 (SWING-ARM CAM)
SLIDING DOOR OPEN WIDTH 50"
MAXIMUM TOOL WEIGHT 17.6 LBS
WEIGHT, APPROX. 17,000 LBS
DIMENSIONS, APPROX. 100"L x 103"W x 117"H

Equipped With:
FANUC 18i-M CNC CONTROL w/9" MONITOR,
RS-232C PORT INTERFACE FOR DNC OPERATION,
RIGID TAPPING (SYNCHRONOUS TAPPING / SOLID TAPPING),
CHIP BLASTER COOL-THRU-SPINDLE UNIT (2000 PSI),
(2) TURBO REAR DISCHARGE CHIP CONVEYORS,
KAMUI SPINDLE & OIL CHILLER,
REMOTE PULSE GENERATOR HAND-WHEEL,
SIDE MOUNTED AUTO-TOOL CHANGER (SWING-ARM CAM),
COOLANT SYSTEM WITH TANK & PUMP,
FULLY ENCLOSED GUARDING, ALL AVAILABLE MANUALS
****RIGID BOX WAY CONSTRUCTION****
*******30 HP HIGH-SPEED SPINDLE*******
***********A QUALITY JAPANESE MACHINE TOOL************
See More at www.mwmachinery.com

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 SHIZUOKA SV-4024, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..