AMADA CTB400수직 밴드 톱

ID#:354310
상표:AMADA
모델:CTB400
형태:수직 밴드 톱
조건:중고 - 좋은
제어:CNC
판매자:판매자가 누군지보기 ...
위치:Illinois
미국
환불 정책:30-일
Stock # :17859
가격:

투기

Lower:34
동력:7.5 kW
블레이드 폭:38.1 mm
블레이드 길이:4,724 mm
Upper:54
분당 피트:492
치수:89"L x 89"W x 91"H
무게:7,800 Lbs.

16.9" AMADA CTB400 CNC VERTICAL CARBIDE BAND SAW
S/N 40850029, MFG 1998, RACO Stk #17859
CUTTING CAPACITY ROUND 30 TO 430 MM - 1.18" TO 16.9", RECTANGULAR16.9" X 16.9"
WORK LOAD CAPACITY 5,500 LBS., SAW BLADE 1-1/2" X .055 X 15'6", BLADE SPEED 50 TO 492 FPM,, BLADE MOTOR 10 HP 220/3/60

THE WORLD'S FIRST CNC OPTIMAL CUTTING CONTROL PRESETS FEEDS AND SPEEDS
ACCORDING TO MATERIAL SPECIFICATION. THIS UNIT HAS 229 FACTORY
INSTALLED MATERIAL SPECS, WITH 100 AVAILABLE FOR CUSTOM MATERIALS.
FEEDS AND SPEEDS ARE AUTOMATICALLY SET TO ACHIEVE THE MOST ECONOMICAL
CUTTING WITH THE HIGHEST PRODUCTIVITY POSSIBLE, WHILE MAINTAINING NOISE
LEVELS BELOW 85 DECIBELS. AMADA CNC CUTTING CONTROL FOR BLADE CONTROL
WITH QUICK APPROACH AND WORK WIDTH SENSOR. BLADE SLIP, BINDING, BREAKAGE
SENSOR. CUTTING CONTROLS INCLUDE CUTTING OIL FLOW RATE, OUT OF SQUARE
CUT DETECTOR, FEED STROKE, FRONT & REAR VISES, WIRE BLADE BRUSH, HYDRAULIC, BLADE TENSIONER, CHIP CONVEYOR, FULL ENCLOSURE.

세부내역

16.9" AMADA CTB400 CNC VERTICAL CARBIDE BAND SAW
S/N 40850029, MFG 1998, RACO Stk #17859

CUTTING CAPACITY --- ( ROUND ) ------------ 30 TO 430 MM - 1.18" TO 16.9"
CUTTING CAPACITY --- (RECTANGULAR ) ------- 16.9" X 16.9"
WORK LOAD CAPACITY ------------------------ 5,500 LBS.
SAW BLADE --------------------------------- 1-1/2" X .055 X 15'6"
SAW BLADE SPEED --------------------------- 50 TO 492 FPM
WORK FEED STROKE --- ( FRONT VISE ) ------- 11.8"
WORK FEED STROKE --- ( REAR VISE ) -------- 15.7"
FEED LENGTH ------------------------------- .0394" TO 393.69"
NUMBER OF CUT-OFF PIECES ------------------ 1 TO 999
REMNANT LENGTH ---------------------------- .059"
TABLE HEIGHT ------------------------------ 39.4"
SAW BLADE MOTOR --------------------------- 10 HP 220/3/60
EQUIPPED WITH ---

THE WORLD'S FIRST CNC OPTIMAL CUTTING CONTROL PRESETS FEEDS AND SPEEDS
ACCORDING TO MATERIAL SPECIFICATION. THIS UNIT HAS 229 FACTORY
INSTALLED MATERIAL SPECS, WITH 100 AVAILABLE FOR CUSTOM MATERIALS.
FEEDS AND SPEEDS ARE AUTOMATICALLY SET TO ACHIEVE THE MOST ECONOMICAL
CUTTING WITH THE HIGHEST PRODUCTIVITY POSSIBLE, WHILE MAINTAINING NOISE
LEVELS BELOW 85 DECIBELS. AMADA CNC CUTTING CONTROL FOR BLADE CONTROL
WITH QUICK APPROACH AND WORK WIDTH SENSOR. BLADE SLIP, BINDING, BREAKAGE
SENSOR. CUTTING CONTROLS INCLUDE CUTTING OIL FLOW RATE, OUT OF SQUARE
CUT DETECTOR, FEED STROKE, FRONT & REAR VISES, WIRE BLADE BRUSH, HYDRAULIC
BLADE TENSIONER, CHIP CONVEYOR, FULL ENCLOSURE.

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 AMADA CTB400, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..