WAGNER WAM-90고속 원형 톱 (비철)

사진 (2)

브랜드
모델
ID#
361784
조건
중고 - 양호
년도
1997
위치
미국
Stock #
8477

이 모델에 대해 더욱

WAGNER WAM-90의 브랜드 정보, 사진, 동영상 등을 비롯한 더 많은 정보를 보시려면 여기를 클릭 하세요

ID#
361784
브랜드
모델
조건
중고 - 양호
년도
1997
위치
미국
Stock #
8477

세부내역

USED WAGNER FULLY AUTOMATIC SAW FOR NON-FERROUS METALS WITH HEAVY DUTY GRAVITY FEED MAGAZINE, Model WAM-90, 3-1/2”, Stock No. 8477

사양

사양을 미터법으로 변환
블래이드 최대직경
12.4 "

Brand: Wagner
Model: WAM-90

Specifications
Cutting Capacity Round Solid @ 90 deg: 5/8” - 3-1/2”
Cutting Capacity Square Solid @ 90 deg: 3-1/8”
Cutting Capacity Flat & Profile @ 90 deg: 4-1/2” x 3-1/8”
Saw Blade Dimensions: 315 mm x 2.0 mm x 32 mm
Automatic Feed Length (one stroke): 12”
Shortest Cut-off Length (Automatic): 3/8”
Minimum Remnant Length: 2-1/2”
Material Discharge: Height = 43”
Cutting Speeds: 900 / 1800 rpm
# of Speeds: 2
Saw Blade Feed: 1” - 80” IPM Infinitely Variable
Main Saw Motor: 14 / 20 HP
Voltage: 460/3/60
Coolant Type: Unist spray mist system
Chip Conveyor: Hinged Belt Type

Equipped with:

Loading Table:
The slope of the 20’ loading table can be adjusted to permit controlled rolling of round bars or sliding of shapes and
rectangular stock. Loading cams orient and transfer the various material shapes one at a time onto the infeed roller track.
They are always positioned for optimal clamping and the shortest cutting path. The bar feeding mechanism consists of a
hydraulically traversed pusher carriage. Infeed rates up to 130 ft./min. are possible. This concept enables positive
infeeding at highest possible speeds. Maximized production rates especially for long cutoffs, is assured.

Special Features:
• Machine base of welded steel construction
• Free chip flow design with funneling mounted to hinge belt conveyor
• Optimum cutting path through pivot under the clamping area
• Saw carriage supported by heavy tapered roller bearings with lifetime lubrication
• Precision clamping
• Feed cylinder and sawblade are on the same plane to avoid lateral forces
• Automatic crop adjustable from 3/8” to 3-1/2”
• Minimum remnant end of 2-1/2”
• Automatic precision length gauge, hydraulically controlled with cushioning
• Micrometer fine tune adjustment for setting within .002”
• Electric piece counter with automatic shut-off control

판매자에 대해

회사 정보 보기

이 모델에 대해 더욱

WAGNER WAM-90의 브랜드 정보, 사진, 동영상 등을 비롯한 더 많은 정보를 보시려면 여기를 클릭 하세요