SHIGIYA GN-40-200일반 및 앵글 헤드를 포함하여 원통 연삭기

ID#:364853
상표:SHIGIYA
모델:GN-40-200
형태:일반 및 앵글 헤드를 포함하여 원통 연삭기
조건:중고 - 좋은
년도:1986
판매자:판매자가 누군지보기 ...
위치:Wisconsin
미국
Stock # :gshx
가격:

투기

Lower:84
스윙:16.1 "
중심:78.4 "
플레인 또는 앵글 헤드:Plain
Upper:104
연마 휠 직경:14.9 "
무게:19,845 lbs
제어반:CNC (Fanuc Oi-TC)

S/N: 10154

EQUIPPED WITH:
Retrofitted With GE Fanuc Series Oi-TC CNC Controls.

GE Fanuc Oi-TC CNC Controls. Combination Live/Dead Spindle Workhead With Swivel Base (30°). Table Swivel Angle Measuring Device (Manual). Hydraulic Tailstock. (3) Adjustable Two-Point Steady Rests. Spare Grinding Wheel Flange. Wheel Spindle Lubrication System Hydraulic System. Coolant. Manuals And Drawings.

SPECIFICATIONS:
Swing over table 410mm / 16.1"
Distance between centers 2000mm / 78.4"
Maximum grinding diameter 380mm / 14.9"
Maximum load weight between centers 150kg / 330.75 lbs
Wheelhead swivel angle (swiveling to the right) 0° - 30°
Wheel size (OD x width x ID) 20" x 3" x 8"
Wheel location Right side
Wheelhead feed (rapid feed travel included) 12.6"
Rapid feed travel 1.5"
Rapid feed speed (maximum) 98 IPM
Grinding feed speed .0004 - 98 IPM
Workhead swivel angle 30°
Work spindle revolution live or dead
Work spindle speeds 30-600 RPM
Taper of center No. 4 MT
Tailstock spindle stroke 2"
Table traverse rapid feed speed (maximum) 197 IPM
Table grinding feed speed .0004 - 197 IPM
Wheel spindle motor 7.5kW / 10 HP
Work spindle motor .75kW / 1 HP
Approximate weight 19,845 lbs

세부내역

16" x 80" Shigiya (Okamoto) GN-40-200 CNC Plain Cylindrical Grinder, GE Fanuc Oi-TC CNC, hdyraulic tailstock, swivel wheelhead, 20"x3"x8" whl, coolant

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 SHIGIYA GN-40-200, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..