OKUMA LR15-M5 축 이상 CNC 선반

ID#:366471
상표:OKUMA
모델:LR15-M
형태:5 축 이상 CNC 선반
조건:중고 - 좋은
제어:CNC (OSP-5020L)
판매자:판매자가 누군지보기 ...
위치:Illinois
미국
환불 정책:있는 그대로
Stock # :20604
가격:

투기

Lower:46
#축:5
척크기:203.2 mm
바 용량:50.8 mm
동력:18.6 kW
최대 RPM:4200 rpm
스윙:449.8 mm
Upper:66
가공 길이:599.9 mm
심압대(예/아니오):Yes
치수:132" x 72" x 67"
무게:12,600 lbs.
제어반:CNC (OSP-5020L)

ONE USED OKUMA 5-AXIS CNC LATHE WITH LIVE MILLING

Model: LR-15M-2S-600
# of axis: 5
Swing over bed: 17.71”
Swing over saddle: 11.81”
Swing over cross slide: 9.84”
Distance between centers: 23.62”
Spindle nose: A2-6
Spindle bore: 2.44”
Spindle speeds: 75 to 4200, two ranges
C-axis: 360 degrees by .001” increments
Z travel: 24.41”
Rapid traverse: 591 ipm
Cutting feed rate: 0.0001 to 40.00 ipr
Turrets: Two, 10 and 8, with 10 Rotary tool capacity
Rotary tool rpm: 100-3000 rpm
Spindle motor: 22/15KW
Rotary tool motor: 3.7/2.2 HP
Dimensions: 132” x 72” x 67” High x 12,600 lbs.

EQUIPPED WITH:
OSP-5020L controls and 160 M storage
Programmable tail stock
8” SMW Autobloc 3-jaw chuck and Type 150 SIU-S draw tube with “Spindle Stopper”
(9) Live tools and (1) Tapping head, VDI
Swing down tool setter for both turrets
C axis
Coolant thru tool or side
Turbo Md. 6287 Chip conveyor, SN: 312454
Built in transformer
Wired 220-440V
Manuals include: two Okuma Parts Manuals, 5020L Maintenance – 3rd Ed., 5020L Alarm & Error, 5020L Programming, 5020L Operators, Turbo CC Parts & Service, OSP Management Data Card, Parameters on a Floppy, and original doc build sheet

SN: 0202-1112

Priced to sell!

세부내역

Loaded with manuals and originally used to make ABS 50 tool holders and was holding +/- 0.0002".

Lower turret was rebuilt along with the live tooling.

Good machine!

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 OKUMA LR15-M, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..