HUFFORD A-12스트레치 성형기계

형태:스트레치 성형기계
판매자:판매자가 누군지보기 ...


톤수:53.524 t

L & F / Hufford A-12 – Long Arm version

Capacity 60 Ton
Jaw Axis Rotation + 180 degrees
Operating Pressure 2,000 PSI
Max. Tension Cylinder Pull 120,000 lbs.
Tension Cylinder Pull (Adjustable) 3 Tons to 60 Tons
Tension Cylinder Stroke 30”
Tension Cylinder Rotation + 25 degrees
Arm Swing (Each Arm) 10 degrees forward to 90 degrees back
Wrapping Speed Range (Adjustable) ½ degree/sec. to 3 degrees/sec.
Return Speed (Non Wrapping Mode) 5 degrees/sec.

Die Length At Full Tonnage and for 180 Degree Bend (longer dies can be used at lower tonnage):
Maximum 72 Inches
Minimum 20 Inches

Maximum Distance Between Jaws:

8” Jaws (not included) 338 Inches
Note: machine is currently equipped with sheet grippers approx. 18 inches wide

Machine Dimensions:
Width 389 Inches
Depth 252 Inches
Height 76 Inches
Die table from floor 43 ½ Inches
Centerline of Jaw to Top of Table 10 ½ Inches
Electrical Requirements 230 volts, 3 phase, 60 Hz
Hydraulic Reservoir Capacity 250 gallons
Weight 60,000 lbs.


Hufford A-12 hydraulic extrusion stretch forming press, 59 ton, long arm version, 6" diameter gripper heads

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 HUFFORD A-12, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..