GANESH GT-2050엔진 선반

ID#:370792
상표:GANESH
모델:GT-2050
형태:엔진 선반
년도:2006
제어:CNC
판매자:판매자가 누군지보기 ...
위치:California
미국
Stock # :366943
가격:

투기

Lower:70
스윙:480.1 mm
Upper:90
중심:1,250 mm

General Specifications As Per Brochure (Buyers are responsible for confirmin
all details below)

Equipped With:

Featuring:
3.15" Bar Capacity and 10" 3-jaw chuck
18.9" Swing Diameter
43.3" Turning Length
49.2" Center Distance
D1-8 Spindle Nose
15 - 2,500 RPM Spindle Speeds
3-Gear Ranges for High-Torque
Fully Enclosed Splashguard
FAGOR 8055-TC CNC Control
GTK-2050 TECHNICAL SPECIFICATIONS

Capacities
Swing over Cross Slide: 10-1/8" (257mm)
Swing thru Gap: 27-9/16" (700mm)
Gap Distance in Front of Faceplate: 8-13/16" (224mm)
Between Centers Distance: 49.2" (1250mm)
Bed Width of Ways: 14-1/2" (370mm)
Bed Depth: 13-3/8" (340mm)

Spindle
Spindle Motor Horsepower: (7.5Kw) 15-HP Peak
(10-HP 30-minute duty rating)
Spindle Speeds: 15 - 2500 RPM infinitely variable
in 3-gear ranges
Spindle Speed Gear Ranges, Automatically Selected:
1= (15 - 300), 2= (301 -850), 3= (851 - 2500) RPM
Constant Power Range: 5.5kw 125 - 2500 rpm (5.5kw)
Spindle Bore: 3-1/8" (80mm)
Spindle Nose - Camlock: D1-8 Camlock
Spindle ID Taper in Spindle Nose: MT-7 Morse Taper # 7
Spindle Taper Reduction Sleeve Provided MT-7 to MT-5 Taper Reduction Sleeve

Cross Slide - X-AXIS
Rapid Traverse Feedrate: 200 IPM (5m/min)
Cross Slide Travel: 8.07" (205mm)
Cross Slide Width: 9" (230mm)
Cross Slide Ballscrew Diameter: 1" (25mm)
Cross Slide Ballscrew Pitch 5mm Accuracy Grade C3 (H-P Laser Tested)
Cross Slide Thrust: 2860 ft. lbs. (1300Kg Force)

-------------------------------------------------------------------------------
Carriage - Z-AXIS
Rapid Traverse Feedrate: 300 IPM (7.5m/min)
Z-axis Travel: 50.4" (1280mm)
Cutting Tool Height Maximum: 1.5" (38mm)
Carriage Ballscrew Diameter: 1-5/16" (36mm)
Carriage Ballscrew Pitch: 10mm Accuracy Grade C3 (H-P Laser
Spindle Taper Reduction Sleeve Provided MT-7 to MT-5 Taper Reduction Sleeve
-------------------------------------------------------------------------
Tested)
Carriage Slide Thrust: 6,200 ft. lbs. (2850Kg Force)

Tailstock- Engraved With Inch / Metric Quill Graduations
Quill Diameter: 2-15/16" (75mm)
Quill Stroke: 7-7/8" (196.5mm)
Quill Taper: MT-5 Morse Taper # 5
Quill Tang Drive and Drift-slot For Tailstock Included
-------------------------------------------------------------------------------
Tailstock body Set-over Adjustment : 3/8" ( 10mm)
Tailstock Body Is "Air Assisted" For Ease In Positioning
Coolant Tank Capacity: 40-gallons (115 liters)

Specifications
Coolant Pump Motor: 350 watt Walrus coolant pump
Coolant Tank Capacity: 30-gallons (115 liters)
Electrical Requirements: 220vac 5%

세부내역

GANESH GT-2050, FAGOR, 10"Chk, 3 1/8"

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 GANESH GT-2050, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..