OKUMA LB-25/650CNC 선반

ID#:371378
상표:OKUMA
모델:LB-25/650
형태:CNC 선반
조건:중고 - 좋은
년도:1990
Serial # :0579
판매자:판매자가 누군지보기 ...
위치:Florida
미국
환불 정책:있는 그대로
Stock # :105787
가격:
$11,950.00 USD

투기

Lower:31
척크기:10 "
바 용량:2.76 "
#축:2
동력:20 hp
최대 RPM:3500 rpm
터닝 직경:14.17 "
스윙:18.9 "
Upper:51
가공 길이:25.59 "
심 압대:Yes
라이브 공구:No
서브 스핀들:No
치수:136" x 72" x 72"
무게:12,760 Lbs
제어반:CNC (OSP-5020LG w/ IGF Conversational)

This machine is equipped with a 10" 3-Jaw Kitagawa B210 Hydraulic Chuck, IGF Conversational Programming, Color Graphics, Newly Rebuilt Monitor, Tailstock with Hydraulic Quill, RS 232 Port Interface for DNC, Transformer 220/440 Volt, Load Monitor B, Tape Reader, Coolant Pump, All Available Tooling & All Available Manuals.

세부내역

On our floor and as expected, this thing will run, run, run. These older Okuma's were built like tanks and to seemingly run forever. This unit may not look the part because its missing some paint but it has a 10" chuck, chip conveyor, IGF conversational programming, and we just had the monitor rebuilt so it is clear as a bell. You'll make money with this one

다운로드

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 OKUMA LB-25/650, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..