AMADA APELIO III 357V레이저 콤보 펀치

ID#:371449
상표:AMADA
모델:APELIO III 357V
형태:레이저 콤보 펀치
년도:1999
제어:CNC (FANUC 16L)
판매자:판매자가 누군지보기 ...
위치:New York
미국
Stock # :10358
가격:

투기

Lower:41
톤수:29.937 t
#터렛 스테이션:58
와트:2,000 W
Upper:61
무게:30000 (LBS)
제어반:CNC (FANUC 16L)

33 TON AMADA APELIO III 357V HYDRAULIC TURRET PUNCH/2000 WATT LASER
COMBINATION MACHINE W/ FANUC 16L CNC CONTROL - MANUFACTURED:1999
APPROXIMATELY 68,000 HOURS - TURBO,VACUUM,INTERNAL OPTICS REPLACED @65,140

1.1 Motion Package
Travel Method: X and Y axes work piece movement
Control Method: X, Y, Z, T, B & C Simultaneous 3 axis control
Drive Motors: Fanuc AC Servo (X, Y, Z, T, B, C)
Maximum Sheet Size: 50" (Y) x 144" (X) with one repositioning cycle
Maximum Axis Travel: 50" (Y) x 72" (X) 11.8" (Z)
Max. Cutting Speed (laser): 590"/min.
Max. Linear Table Speed: 2560"/min (x), 1968"/min (y).
Max. Speed - Z-Axis: 472"/min.
Positioning Accuracy: 0.002"/39.37"
Punching Accuracy: 0.004"
Repeatability: 0.0004"
Maximum Work Thickness:
0.250" Carbon Steel
0.187" Clean Cut Stainless
0.250" Clean Cut Stainless with high pressure assist gas
0.125" Stainless (punch)
0.187" Aluminum

1.2 Punching System
Press Capacity: 33 Tons
Press Stroke: 1.575"
Press Speed: 220 SPM (0.315" stroke, 0.315" move)
Hit Rate (1" move): 180 HPM (0.315" stroke, 1" move)
Maximum Hole Diameter: 4.5"
Tool Type: Amada Thick Turret
Turret Rotation Speed: 30 RPM
Turret Capacity: 58 Stations (2 auto-index)
Turret Specification
36 - " stations (12)
12 - 1" stations (12 keyed)
4 - 2" stations (2 keyed)
2 - 3" stations (2 keyed)
2 - 4" stations (2 keyed)
2 - 1" auto-index stations

1.4 CNC Controller
Model: 16-L Control (Fanuc)
Control Function: X, Y, Z, T, B & C simultaneous 3 axis
Laser Power control (CW, Pulse)
Input Method: Floppy Disk, MDI, Edit, DNC
MMC Functions: Geometric Input (metric only), Maintenance
Minimum Command Unit: 0.001" (X, Y, Z)
Minimum Travel Unit: 0.001" (X, Y, Z)
Operating Mode: Automatic, MDI & Manual
Display Modes: Program Contents, Position Information, Program Check,

Settings, Parameters,
Tool Diameter Compensation, Assist Gas Status, Self Diagnostics
Interlock Displays
Water Volume, Water Temperature, Gas Pressure, Vacuum Leak, Blower
Malfunction, Shutter Power, Discharge, Assist Gas, Door Open
Electrical Requirements: 208 VAC, 3 Phase, 60 HZ, 34 KVA

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 AMADA APELIO III 357V, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..