OERLIKON K4A베벨 기어 생성기

ID#:373755
상표:OERLIKON
모델:K4A
형태:베벨 기어 생성기
조건:중고 - 좋은
년도:1967
위치:Michigan
미국
환불 정책:있는 그대로
Stock # :129095
가격:

투기

OERLIKON K4a 63" STRAIGHT BEVEL GEAR GENERATOR
Serial Number: 297462
Year: 1967

Specifications:
Maximum Pitch Circle Diameter, Ratio 1 : 1: 49.2", (1250mm)
Maximum Pitch Circle Diameter, Ratio 1 : 1.2: 53.55", (1360mm)
Maximum Pitch Circle Diameter, Ratio 1 : 1.5: 57.85", (1470mm)
Maximum Pitch Circle Diameter, Ratio 1 : 2 Up To 1 : 8: 63", (1600mm)
Maximum Module = 36, DP = 0.7, CP = 4 1/2"
Minimum Module = 2, DP = 12, CP = 1/4"
Minimum Tooth Number For Ratio 1 : 1: 20
Minimum Tooth Number For Ratio 1 : 8: 10
Maximum Face Width: 11.80", (300mm)
Maximum Pitch Cone Distance: 34.85", (885mm)
Spindle Nose: Oerlikon Short Taper 1 : 4: 10.63", (270mm)
Taper Socket 1 : 20: 6.70", (170mm)
Through Hole: 5.90", (150mm)
Maximum Distance From Faceplate To Pitch Cone Apex: 37.40", (950mm)
Minimum Distance From Faceplate To Pitch Cone Apex: 6.70", (170mm)
Maximum Swivel Table Angle: 83 Degrees
Minimum Swivel Table Angle: 7 Degrees
Workhead Center Height: 32.50", (825mm)
Maximum Planning Slide Stroke: 12.60", (320mm)
Minimum Planning Slide Stroke: 1.97", (50mm)
Maximum Addendum Angle: 6 Degrees, 30'
Maximum Dedendum Angle: 7 Degrees, 30'
Cutting Speeds (16 To 112 Strokes/Min.): 16
Feeds (From 0.4 To 10.6 Angle Minutes Per Stroke): 29
Tool Cross Section: 0.94" x 1.89", (24mm x 48mm)

Equipped With:
Crowning Attachment
Templates
Cutter Boxes
Rim Steady
Change Gears
Gauge
Coolant Pump, Motor & Tank

Approximate Dimensions: 173" L x 157" W x 96" H,
(4400mm L x 4000mm W x 2450mm H)
Approximate Weight: 37500 Lbs., (17,000 kg)

(#129095)

세부내역

Oerlikon K4a 63" Straight Bevel Gear Generator

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 OERLIKON K4A, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..