HARDINGE COBRA 51CNC 선반

ID#:374431
상표:HARDINGE
모델:COBRA 51
형태:CNC 선반
조건:중고 - 좋은
년도:1999
위치:Pennsylvania
미국
Stock # :HB-20304
가격:

투기

Lower:44
척크기:8 "
바 용량:2 "
#축:2
동력:20 hp
최대 RPM:4500 rpm
터닝 직경:8.25 "
Upper:64
스윙:21 "
가공 길이:16 "
심 압대:Yes
치수:129 x 66 x 68
무게:8000 LBS
제어반:CNC (FANUC 21IT)

SPECIFICATIONS

20C COLLET SPINDLE
SPINDLE CONFIGURATION: ANSI A2-6"
DRAW TUBE TYPE: HYDRAULIC
ROUND 20C COLLET (THROUGH CAP.): 2.0"
MAXIMUM TURNING LENGTH WITH COLLET: 14"
MAXIMUM MACHINING DIAMETER: 8.25"

AC DIGITAL SPINDLE DRIVE SYSTEM
HORSEPOWER RATING (INTERMITTENT): 20 HP
HORSEPOWER RATING (CONTINUOUS): 15 HP
TORQUE RATING(INTERMITTENT): 63 FT-LB
@ 1,666 RPM BASE SPEED
TORQUE RATING (CONTINUOUS): 47.2 FT-LB
@ 1,666 RPM BASE SPEED
SPEED RANGE (1-RPM STEPS): 45 TO 4,500 RPM

CARRIAGE AND CROSS SLIDE
MAXIMUM SWING OVER UPPER WAY COVER: 21.0"
MAXIMUM X-AXIS TRAVEL: 7.75"
MAXIMUM Z-AXIS TRAVEL WITH COLLET: 14.0"
MAXIMUM X-AXIS TRAVERSE RATE: 472 IPM
MAXIMUM Z-AXIS TRAVERSE RATE: 787 IPM
MAXIMUM Z-AXIS THRUST: 1,500 LBS

VERTICAL TURRET (BI-DIRECTIONAL)
NUMBER OF STATIONS: 12
MAXIMUM SQUARE SHANK TOOL SIZE: 3/4"
MAXIMUM ROUND SHANK TOOL SIZE: 1-1/4"

TAILSTOCK
POSITIONING: MANUAL/HYDRAULIC QUILL
MORSE TAPER CENTER: MT NO. 3
TRAVEL OF TAILSTOCK BASE: 22.0"
QUILL TRAVEL: 4.0"
MAXIMUM THRUST @ 90 PSI: 1,500 LBS

GENERAL
DIMENSIONS: 92” LR X 66” FB X 68” H
APPROXIMATE SHIPPING WEIGHT: 6,200 LBS
ELECTRICS: 230 VOLTS, 3 PH, 60 CYC

EQUIPPED WITH

FANUC 21iT CONTROL
TAILSTOCK
PARTS CATCHER
MISCELLANEOUS TURRET TOOLING
CHIP CONVEYOR
SPEGO TURNMATIC 126H MULTI-TUBE HYDRAULIC BARFEED

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 HARDINGE Cobra 51, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..