ELDORADO총 훈련

ID#:376576
상표:ELDORADO
형태:총 훈련
조건:중고 - 좋은
판매자:판매자가 누군지보기 ...
위치:Illinois
미국
Stock # :hsd75bmx
가격:

투기

Lower:56
최대 드릴 구멍:0.75 "
Upper:76
최대 드릴링 깊이:30 "

3/4" x 30" Eldorado Precision Deep Hole Gun Drill mounted on Lucas horizontal boring mill

EQUIPPED WITH:
Motor Driven With 3 HP, 3 Phase, 60 Cycle 208/230/460 Volt Spindle Drive. 7.5 HP 3 Phase 60 Cycle Coolant System. Complete Electrical Controls. Allen Bradley PLC with Panelview Plus 400 Controller.

Ball Screw Driven Drill Feed. Eldorado F18 "Mega Flo" High Pressure Coolant System With Filtration And Heat Exchanger. Ball Screw Driven Headstock Feed System. Chip Box. Whip Guide. Mitutoyo 2-Axis DRO for Table Position and Vertical Head Position.

The Drill Is Mounted On A Lucas Boring Mill Machine Base With A 34" x 60" T-Slotted Table. There Is Approximately 60" Longitudinal Table Travel and 24" Vertical Spindle Travel.

SPECIFICATIONS:
Drilling Diameter Maximum .75
Drilling Diameter Minimum .0550"
Maximum Drilling Depth 30"
Spindle Speeds 1445-11740 RPM
Feed Rate Drilling 1-99.9 IPM
Feed Rate Rapid 200 IPM
Work Table 34" x 60"
Height of Spindle Centerline 0-24"
Straightness per 12" .001"
Coolant Pressure, Maximum 1500 PSI
Reservoir Capacity 90 Gallon
Coolant Flo 18 GPM
Filtration 5 Micron

세부내역

3/4" x 30" Eldorado Precision Deep Hole Gun Drill mounted on Lucas horizontal boring mill