DMG MORI CTX GAMMA 3000 TC5 축 이상 CNC 선반

ID#:377166
상표:DMG MORI
모델:CTX GAMMA 3000 TC
형태:5 축 이상 CNC 선반
년도:2012
판매자:판매자가 누군지보기 ...
위치:Illinois
미국
Stock # :11571
가격:

투기

Lower:17
#축:5
척크기:20 "
바 용량:5 "
Upper:37
가공 길이:120 "
심압대(예/아니오):Yes
제어반:CNC ( siemens 840D)

34" X 120" DMG-MORI MODEL CTX GAMMA 3000 TC 5-AXIS
SIMULTANEOUS TURNING/MILL CENTER WITH Y-AXIS

SERIAL NUMBER NA NEW 2012

GENERAL SPECIFICATIONS:

Work area:
Swing dia. Max. 27.6"
Turning dia. Max. 34.6"(27.6)
Turn-Mill Spindle Carrier (Top)
Cross travel (X1) 25.6"(-0.8)
Vertical travel(Y1) +/-7.9"
Longitudinal travel (Z1) 120.1"
Turret Slide (Bottom)
Cross travel (X2) 8.3"
Longitudinal travel (Z2) 112.2"
Main Spindle:
Spindle head (Flat flange) A15
Spindle dia. in the front bearing 8.7"
Clamping chuck 15.7"/19.7"|19.7/24.8
Drive Power (40/100%DC) (HP/AC) 69.7/53.8|79.1/67.1 Max. Rotation 2000 RPM Counter Spindle:
Spindle head (Flat flange) A15
Spindle dia. in the front bearing 5.1"|(6.3) Chuck 9/8"/12.4|12.4-19.7"
Drive Power (40/100% DC) HP (AC) 60.3/46.9|(69.7/63.6)
Torque max. (40/100% DC) Ft/Lbs 567.9/442.5|(1622.2/1253.9)
Max. Rotation Speed 4000 RPM
Feed drive AC, Slide 1, Rapid traverse X/Y/Z 1574.8/1574.8/1818.1 Turning-milling Spindle:
Tool reception HSK-63A (HSK-100)
Spindle speed Max. 12,000|(18,000) RPM
Drive power (40 DC) 20/5|(30.8)|(42.9)HP Torque Max. (40 DC) Ft/Lbs 73.8|(77.4)|106.9) B-Axis (Torque Drive) Swivel range (B) 240 deg.
Torque, Max. (40% DC) 2,065.2 ft/lbs
Hydraulic clamping 2,950.2 ft/lbs

GENERAL SPECIFICATIONS: (CONT.)
Tool Magazine:
Number of tools 80
Tool length 550mm
Tool weight G1/G2 25 kg
Tool diam., Max. (with pocket empty) 110/1140mm Tool mount (turret, Bottom) Number of tool stations 12 Driven tool stations 12 Shaft diam. (according to DIN 69880) 1.6"
Drive power (40% DC) 12.6 HP
Torque Max (40% DC) 22.1 ft/lbs
Max. rotation speed 4000 RPM
Tailstock:
Tail stock (automatically traversable) 112.2"
Center location MT6
Max. Tailstock pressure 5,620.2 lbf

EQUIPPED WITH:
Siemens 840D CNC Control & 5-Axis Simultaneous Machining 42.9/60.3 HP Heavy Duty Turn/Mill Spindle with increased Torque HSK 100
80 Position Automatic Tool Changer
Main Spindle HP (67/79 HP) 2000 RPM Spindle, 127mm, 4.9"Inner Dia. of draw Tube Counter Sub Spindle (46.9/60.9 HP) 104mm, 4.09" Dia. of Draw Tube Full C-Axis and Hydraulic Chucking Cylinder
600 Liter Coolant System 20 Bar/290 PSI
Tailstock Function for Sub Spindle, Mechatronic Control of the supporting force Programmable slide for Steady Rest 4.92"-18.11"
20" 3-Jaw Chuck on Main Spindle & 16" 3-Jaw Chuck on Sub Spindle

Note: Very Low Hours Use

다운로드

DMG MORI CTX GAMMA 3000 TC (5.8메가 바이트)
파일을 다운 받기 위해서는 여기를 누르십시요

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 DMG MORI CTX GAMMA 3000 TC, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..