EMCO MAIER HYPERTURN 110CNC 선반

ID#:377811
상표:EMCO MAIER
모델:HYPERTURN 110
형태:CNC 선반
조건:중고 - 우수
제어:CNC (Seimens 840 D-sl)
판매자:판매자가 누군지보기 ...
위치:Ohio
미국
가격:

투기

Lower:87
바 용량:95 mm
#축:4
동력:33 kW
최대 RPM:3500 rpm
스윙:720 mm
Upper:107
가공 길이:1,940 mm
치수:2900mm X 8600mm
무게:16500 kg
제어반:CNC (Seimens 840 D-sl)

Work area
Swing over bed 720 mm (28.3")
Distance between spindle noses 1700 – 2300 mm (66.9 – 90.6")
Max. Bore in Draw Tube (A2-8) 95 mm (3.7")
Travel
Travel in with milling spindle X1 / Z1 550 / 1300 – 1900 mm
(21.7 / 51.2 – 74.8")
Travel in 2 / Z2 300 / 1340 – 1940 mm
(11.8 / 52.8 – 76.4")
Y travel in 240 mm (+/- 120 mm)
(9.4" (+/- 4.7"))
Main and counter spindle (A2-8)
Maximum speed 3500 rpm
Maximum power 33 kW (44.3 hp)
Maximum torque 800 Nm (590 ft/lbs)
Main and counter spindle (A2-11)
Maximum speed 2500 rpm
Maximum power - main spindle 52 kW (69.7 hp)
Maximum torque - main spindle 2480 Nm (1828 ft/lbs)
Maximum power - counter spindle 42 kW (56.3 hp)
Maximum torque - counter spindle 1040 Nm (767 ft/lbs)
Tailstock
Taper mounting (integrated bearing) MT 5
Travel in 1100 / 1600 mm (43.3 / 63")
Quill stroke 150 mm (5.9")
Quill diameter 150 mm (5.9")
Tool turret top and bottom
Number of tool positions 2 x 12
Tool holding shaft in accordance with 40 mm (1.8")
VDI (DIN 69880)
Driven tools
Speed range 0 – 3000 rpm
Torque 40 Nm (29.5 ft/lbs)
Drive performance 10.5 kW (14 hp)
Driven tools 2 x 12
B-axis and PowerMill
Travel range 205°
Tool magazine positions 40 (80 optional)
Tool holder HSK63, C6, C5
Maximum torque 128 Nm (94.4 ft/lbs)
Maximum power 21.5 kW (28.8 hp)
Maximum speed 7000 (12000) rpm
Tool change time (tool - tool) 2.2 sec
Feed drives
Rapid motion speed X / Z counter spindle 30 m/min (1181 ipm)
Rapid traverse speed in Y 15 m/min (590 ipm)
Coolant system
Tank volume 420 / 520 liters
(119 / 137.6 gal)
Pump capacity 14 bar / 10 l/min
(203 PSI / 2.6 gal/min)
Dimensions
Height of center above floor 1360 mm (53.6")
Overall height 2800 mm (110.2")
Space required inclusive tool magazine 8500 / 9100 x 3150 mm
(334.6 / 358.3 x 124")
Total weight 16000 – 22000 kg
(35274 – 48500 lb)
Safety devices CE compliant

세부내역

The EMCO Hyperturn 110 was designed to enable further increases in productivity in mass production. Whether rod, shaft, flange, or cubic parts, the modular design of the many Hyperturn 95/110 models enables them to cover a wide range of machining tasks.
They are particularly suited to the series production of workpieces in the automotive industry, mechanical engineering, plainbearing
technology, and aviation.

다운로드

EMCO MAIER HYPERTURN 110 (1.96메가 바이트)
파일을 다운 받기 위해서는 여기를 누르십시요