MAZAK SUPER QUADREX 250CNC 선반

ID#:378432
상표:MAZAK
모델:SUPER QUADREX 250
형태:CNC 선반
조건:중고 - 좋은
년도:2000
제어:CNC (Mazatrol PC-Fusion-CNC 640TE)
판매자:판매자가 누군지보기 ...
위치:Kentucky
미국
환불 정책:있는 그대로
Stock # :XXG103114
가격:

투기

Lower:48
척크기:254 mm
바 용량:63.5 mm
#축:4
동력:22.4 kW
최대 RPM:4000 rpm
스윙:584.2 mm
가공 길이:609.6 mm
Upper:68
심 압대:Yes
라이브 공구:No
서브 스핀들:No
치수:132.64" x 80.3" x 85.43"
무게:14,080
제어반:CNC (Mazatrol PC-Fusion-CNC 640TE)

STANDARD SPECIFICATIONS:
Standard Chuck Diameter: 10"
Standard Bar Capacity: 2.5"
Maximum Swing: 23"
SPINDLE:
Spindle Nose: A2-6
Spindle Bore: 2.99"
Spindle Speed: 35~4,000 RPM
Number of Speed Ranges: 1
Spindle Horspower (Cont/30 Mins): 20/30HP (A.C.)
Spindle Torque: 258 ft-lbs
STANDARD TURRETS:
Type of Turret (Lower): Dodecogonal Drum/Hydraulic Non Lift
Type of Turret (Lower): Octogonal Drum/Servo Non Lift
Number of Tools (Upper/Lower): 12/8
Maximum Cutting Dia. (Upper/Lower Turret): 14"/10.39"
Maximum Cutting Length (24" Universal): 22.375"
Tool Sizes:
Turning & Facing: 1" x 1"
Boring Bar Shank Dia.: 1.5"
Upper Turret Index Time (sec): 0.25/1 pos 1.2/Full Turn
Lower Turret Index time (sec): 0.2/1 pos 0.6/Full Turn
Axis Travel:
X-Axis (Upper/Lower): 7.5"/5.875"
Z-Axis (24" Universal)(Upper/Lower): 25.5"/24.875"
Rapid Traverse Rate:
Upper Turret: (X & Z Axis) - 1181 IPM
Lower Turret: (X Axis) - 1181 IPM
Lower Turret: (Z Axis) - 787 IPM
Tailstock: (Universal Model)
Quill Taper: MT #4
Quill Diameter : 3.9"
Quill Stroke : 3.94"
Body Travel (24" Universal): 20.5"
Floor Space: (L X D) (24" Universal) 132.64" x 80.3"
Machine Height: 85.43"
Total Power Required (Machine only): 32.68 KVA
Note: Actual Machine Main Transformer
KVA Rating Will Be Greater
Machine Weight (24" Universal): 14,080 lbs.

세부내역

STANDARD EQUIPMENT:
Mazatrol PC-Fusion-CNC 640TE control (10.4" Color LCD)
Includes: RS232C Interface, Background Tool Path Check, 8 Figure Program
Number, Floppy Disk Unit, PCMCIA Interface, IC Memory Card
Interface, EIA/ISO Input, Macro Programming with 600 variables, Polar Coordinate Interpretation, Selection of Workpiece Coordinate System and Direct Entry of Drawing Dimensions.
Automatic Tool Setting System (Tool Eye): (Tool set-up/Tool Wear
Compensation/Tool Breakage Detection)
Multi-tap Transformer which accommodates 190-500 Volts
Hydraulic Unit
Standard Worklight
Complete Coolant System 520W x 2
(Coolant Tank Capacity 63.4 gal)
Chip & Coolant Splash Guarding
(Full Coverage)
10" Hydraulic Thru‑Hole Chuck #B‑210A615 Cylinder S‑1875‑15Y with
One (1) Set of Soft Jaws
Front Door Interlock
Hydraulic Pressure Interlock
Programmable Tailstock with High Speed Live Center
Chip Conveyor Preparation

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 MAZAK SUPER QUADREX 250, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..