HARDINGE CONQUEST T42CNC 선반

ID#:380777
상표:HARDINGE
모델:CONQUEST T42
형태:CNC 선반
년도:1996
Serial # :SG-919-B
제어:CNC (FANUC 18T)
판매자:판매자가 누군지보기 ...
위치:Pennsylvania
미국
Stock # :CK-20091
가격:

투기

Lower:70
바 용량:41.28 mm
#축:3
동력:7.5 kW
최대 RPM:5000 rpm
터닝 직경:228.6 mm
스윙:538.5 mm
Upper:90
가공 길이:332.7 mm
심 압대:Yes
치수:125 x 70 x 67
무게:10,000 LBS
제어반:CNC (FANUC 18T)

SPINDLE
SPINDLE CONFIGURATION (ANSI): A2-5", 16 C
ROUND COLLET (THROUGH CAPACITY): 1.625"
HANG WEIGHT WITH WORK HOLDING DEVICE: 75 LBS

AC DIGITAL DRIVE SYSTEM
STANDARD: 10 HP
TORQUE RATING: 42 FT-LB
SPEED RANGE (1-RPM STEPS): 50 TO 5,000 RPM

CARRIAGE AND CROSS SLIDE
SWING DIAMETER OVER UPPER WAY COVER: 21.2"
PRELOADED BALL SCREW DIAMETER: 1.259"
MAXIMUM X-AXIS TRAVEL: 5.31"
X-AXIS RAPID TRAVERSE RATE: 472 IPM
Z-AXIS RAPID TRAVERSE RATE: 630 IPM
MAXIMUM Z-AXIS (DRILLING) THRUST 1,500 LBS

BI-DIRECTIONAL VERTICAL TURRET
NUMBER OF STATIONS: 12
SQUARE SHANK TOOL SIZE: 3/4"
ROUND SHANK TOOL SIZE: 1-1/4"
DISTANCE FROM SPINDLE FACE TO TURRET: 14"
TURNING DISTANCE: 13.8"

LIVE TOOLING
HORSEPOWER RATING (AT TOOL TIP): 2.4 HP
TORQUE RATING (CONTINUOUS): 52 IN-LB
SPEED RANGE (1-RPM STEPS): UP TO 4,000

TAILSTOCK
CENTER TAPER: MT #3
TRAVEL MAXIMUM: 11.5"
RAPID TRAVERSE / RETURN RATE: 300 IPM
THRUST / MAXIMUM: 700 LBS

GENERAL
DIMENSIONS: 93" LR X 70 FB X 67” H
WEIGHT: 9,800 LBS
ELECTRICS: 230 VOLTS, 3 PH, 60 CYC

EQUIPPED WITH
GE FANUC 18T CONTROL
16C COLLET CHUCK
HYDRAULIC TAILSTOCK
CHIP CONVEYOR
MISCELLANEOUS STANDARD TOOL HOLDERS
PARTS CATCHER

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 HARDINGE CONQUEST T42, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..