CINCINNATI GILBERT C SERIES수평 테이블 타입 보링

ID#:380890
상표:CINCINNATI GILBERT
모델:C SERIES
형태:수평 테이블 타입 보링
년도:1967
위치:Ohio
미국
Stock # :8280
가격:

투기

Lower:80
스핀들 크기:4 "
테이블의 X-수평 TVL:96 "
머리의 Y-수직 TVL:60 "
동력:15 hp
Upper:100
분당 회전속도:1715 rpm
테이블 W:96 "
테이블-L:48 "

ONE (1) USED
4" CINCINNATI GILBERT TABLE TYPE HORIZONTAL BORING MILL


NEW IN 1967
MODEL: SERIES C

Note: THIS MACHINE WAS COMPLETELY REMANUFACTURED BY CINCINNATI GILBERT in 1988

SPECIFICATIONS:

SPINDLE DIAMETER........................... 4"

CONTINIOUS FEED TO SPINDLE................. 30"

SPINDLE TAPER.............................. #50

VERTICAL TRAVEL............................ 60"

CROSS TRAVEL............................... 96"

SADDLE TRAVEL.............................. 28"

WORKING SURFACE OF TABLE............. 48" X 96"

LENGTH OF SADDLE.......................... 140"

SADDLE WIDTH............................... 40"

SADDLE TRAVEL ON BED - MAXIMUM............. 28"
- MINIMUM............. 1"

SPINDLE SPEEDS IN GEOMETRIC PROGRESSION..... 36

SPINDLE SPEED RANGE............... 8 - 1715 RPM

SPINDLE FEEDS............................... 16

SPINDLE FEED RANGE............ .0006 - .125 IPR

FEEDS............................ .020 - 40 IPM

RAPID TRVERSE RATE..................... 120 IPM

MAIN DRIVE MOTOR...................... 15 HP AC

ELECTRICS............................. 440/3/60

FEATURES & EQUIPMENT:

3-AXES READOUT

AUTOMATIC LUBRICATION OF ALL WAYS

HARDENED AND GROUND REPLACEABLE WAYS ON BOTH BED AND SADDLE

WAY COVERS FOR SADDLE WAYS ATTACHED TO TABLE

WAY COVERS FOR FRONT OF MACHINE BED COVERING CENTER GUIDE WAYS ON BED

FULL PENDANT CONTROL (HEIGHT OVER PENDANT BOOM 160", MAX. HEIGHT OVER COLUMN IF PENDANT LOWERED 141")

POWER DRAWBAR AND TOOL EJECTOR




3 TABLE T-SLOTS CROSS

6 TABLE T-SLOTS LONG

UPDATED FEATURES FROM RE-BUILD: 1988

NEW HYDRAULIC MAIN DRIVE CLUTCH AND BRAKE IN LIEU OF ELECTRIC CLUTCH AND BRAKE

HYDRAULIC ORBIT MOTOR SHIFTING FOR SPINDLE SPEEDS AND FEEDS

HARDENED ROLLED BALL SCREWS AND ANTI-BACKLASH NUTS FOR TABLE,

SADDLE, HEAD AND SPINDLE
NEW CARBURIZED AND GROUND SPINDLE AND SPINDLE BUSHINGS ANTI-FRICTION LINERS ON ALL MACHINE SLIDING SURFACES AND GIBS

"AS IS, WHERE IS" OHIO

세부내역

4" CINCINNATI GILBERT TABLE TYPE HORIZONTAL BORING MILL THIS MACHINE WAS COMPLETELY REMANUFACTURED BY CINCINNATI GILBERT IN 1988

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 CINCINNATI GILBERT C Series, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..