HYD-MECH S-20P수평 밴드 톱

ID#:381481
상표:HYD-MECH
모델:S-20P
형태:수평 밴드 톱
조건:중고 - 좋은
년도:1996
위치:Michigan
미국
환불 정책:30-일
Stock # :9861
가격:

투기

Lower:41
사각 - 능력(높이):13 "
직사각형 - 능역(폭):18 "
동력:3 hp
블레이드 폭:1 "
Upper:61
블레이드 두께:0.032 "
블레이드 길이:162 "
치수:80"x 81"x 56"
무게:1800 lbs

USED HYD-MECH HORIZONTAL BANDSAW
MODEL: S-20P ♦ YEAR: 1996
Stock No. 9861
Specifications:
Max. cutting cap. 90 deg. round: 13”
Max. cutting cap. 45 deg. round: 12”
Max. cutting cap. 90 deg. square: 13” x 13”
Max. cutting cap. 45 deg. square: 12” x 12”
Max. cutting cap. 90 deg. rectangular: 13” x 18”
Max. cutting cap. 45 deg. rectangular: 13” x 10-3/4”
Max degree of miter: 30 degrees
Blade dimensions: 13’6” x 1” x .032”
Blade guides: Carbide
Guide arm (manual/powered): Manual
Blade speeds: 75-400 SFPM
Number of speeds: Infinite
Blade motor: 3 HP
Blade drive type: Pulley to gearbox
Blade tension type: Manual
Blade wheel size: 16”
Head lift type: Hydraulic
Hydraulic motor: 2 HP
Coolant tank capacity: 6 gallons
Coolant type: Flood
Table height: 30”
Number of vises: 1
Vise type (manual/hydraulic/air): Hydraulic
Voltage: 220/440
Dimensions: 80” x 81” x 56”
Weight: 1,800 lbs.

Equipped with:
•Hyd-Mech sequencer control with blade speed, readout and parts counter
•Flood coolant with wash down hose
•Mitering to 30 degrees in one direction
•Carbide blade guides
•Variable hydraulic down feed force
•Powered blade chip brush
•Manual length stop

세부내역

13" x 18" Hyd Mech S-20P, Semi Auto, 1" blade, 3 HP, Miter 30 degree, Hyd downfeed, 75-400 SFM, manual length stop (1996)

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 HYD-MECH S-20P, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..