ATLAS VAC MACHINE 15X18 TRAY실러

ID#:381722
상표:ATLAS VAC MACHINE
모델:15X18 TRAY
형태:실러
조건:중고 - 우수
년도:2009
위치:Minnesota
미국
Stock # :12511
가격:

투기

(1) Used Atlas Vac Model 15x18 Small Platen with Dual Shuttle Medical Device Vacuum Tray Sealing Machine, New 2009

Specifications:
Heat Sealing Area - 15 in. X 18 in. (38.1 cm x 45.7cm)
Sealing Pressure – adjustable up to 5,000 pounds, precision stationary support surface for tool shuttle alignment
Manually operated dual aluminum shuttles, clear anodized, on smooth 1” diameter stainless shafts w/non-lube linear ball bearings
Two hand safety start sensors (not buttons), ergonomically correct Banner Opti-touch
Heating Elements - 240v or 480v, Large mass flat 1” heat plate w/internal heaters, 3000w
Seal Platen – precision machined Aluminum,
Stainless steel & Lexan shuttle guards
Quick change lift off tooling receivers to provide versatility and productivity; includes SS locator pins for tooling plates
Electrical Requirements - 3 KW on 220v, 220/240v or 480v; 1ph or 3ph available
Floor Space – 68” X 35” (172 cm x 89cm) resulting in no wasted space compared to carrousels
Weight - 450 pounds (204kg); rugged, durable, not made of angle and sheet metal

Features:
Mitsubishi E1032 programmable operator interface (OIT); stores multiple recipes
Programmable Time and Temperature controls w/limits is standard
Electronic process monitoring with temperature & air pressure sensor fail-safe alarms for validated parameter settings, PW protected.
Emergency stops (2), includes stationary safety shields
Shuttle guards
Pressure regulation
Pressure validation port for easy calibration gage connection to pressure circuit
Timer calibration connector
English or Metric units of measure readouts (specify at ordering)
Air Usage - .35 CFM @ 80 PSI at 4 cycles per minute. Supply @ 100psi with 3/4”+ dia line minimum.
Air filter included
Single exhaust port connection to discharge line from room or w/ standard muffler system provided

Specifications and Equipment are Preliminary, Subject to Buyer Verification.

세부내역

Atlas Vac 15x18 Small Platen with Dual Shuttle Medical Device Vacuum Tray Sealing Machine, 2009. Inventory # 12511

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 ATLAS VAC MACHINE 15X18 TRAY, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..