YAM 1500G엔진 선반

ID#:383548
상표:YAM
모델:1500G
형태:엔진 선반
Serial # :830022
판매자:판매자가 누군지보기 ...
위치:California
미국
Stock # :1235
가격:

투기

Lower:53
스윙:431.8 mm
중심:1,778 mm
Upper:73
분당 회전속도:1800 rpm
슬라이드 위 스윙:254 mm

Specifications:

Capacities:
Swing Over Bed: 17"
Swing Over Cross Slide: 10"
Swing Over Compount Slide: 5.5"
Distance Between Centers: 70"

Spindle:
Mount: D1-6
Thru Hole: 2 1/4"
Number of Speeds: 12
Speed Range: 45 to 1,800 RPM

Carriage:
Cross Slide Travel: 10"
Compount Slide Travel: 6"
T-Slot Dimnesions: 1-3/16" x 1-55/64" (approx.)

Threads:
Inch: 4 to 224

Tailstock:
Spindle Taper: #4 Morse Taper
Spindle Diameter: 2.56"
Spindle Travel: 6-3/4"

Bed:
Width: 14"
Length: 88"

General:
Motor: 7.5 Horsepower, 220 Volt, 1,500 / 1,800 RPM, 50 / 60 Hz
Electrical: 220/440 Volt, Three Phase
Overall Dimensions: 94" x 36" x 73" tall, Weighs: 5500 Lbs

Features:
Gap Bed Lathe
Hardened Bed
8" Bison Three-Jaw Chuck
10" ROHM Four Jaw Chuck
Royal Collet Closer
3 Point Steady Rest
Carriage Stops
Foot Brake
Coolant System

Comes as shown in pictures. Sold As-is

세부내역

“This machine has been tested & is in Good working condition. Check Video.”

GUARANTEE: If any machine guaranteed by us does not prove satisfactory mechanically, the Purchaser may return it freight prepaid within 14 days from date of shipment and we will refund the purchase price in full. This does not apply to machine sold “as is” or “subject to inspection”. This guarantee applies only to machines which we own. The machine must be returned in the same condition that it left our warehouse. MachineStation shall not be responsible for any damage done by truckers, riggers, or other parties. Machine damaged in shipping are not covered under the return privilege.

WARRANTY: Seller makes no warranties of any kind whatever, expressed, or implied. All specifications and descriptions of said goods are approximate, not binding and meant only as a guide. It is the Buyer’s responsibility to inspect the goods and ascertain if the specifications, description and condition of the goods confirm to the Buyer’s requirement.

MACHINE USE AND SAFETY: Buyer acknowledges that the goods described herein are pre-owned used goods which were neither designed or manufactured by the Seller, nor has the Seller knowledge of, or control over, the prior use or misuse of said goods: nor does the Seller have knowledge or control over the application of these goods by the Buyer. It is the Buyer’s (user’s), responsibility to provide proper safety devices, equipment and instructions for any particular use, and to take all necessary steps to confirm to all Federal, State or Local Government Safety Standards and including OSHA.

BUYER IS RESPONSIBLE FOR SCHEDULING TRANSPORTATION OF THIS MACHINE, AS WELL AS ALL COST TO MOVE IT. IF YOU NEED HELP WITH SCHEDULING, PLEASE CONTACT US AND WE WILL ASSIST YOU. WE SHIP GLOBALLY.

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 YAM 1500G, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..