TRAUB TNC65 DGY5 축 이상 CNC 선반

ID#:384578
상표:TRAUB
모델:TNC65 DGY
형태:5 축 이상 CNC 선반
조건:중고 - 좋은
판매자:판매자가 누군지보기 ...
위치:미국
Stock # :cnctrx
가격:

투기

Lower:54
#축:7
동력:25 hp
최대 RPM:5000 rpm
Upper:74
가공 길이:17.7 "
무게:13,500 lbs
제어반:CNC (Traub TX-8F10 Meldas)

S/N: 455 New: 1996

EQUIPPED WITH:
Traub/Mitsubishi TX-8F10 Meldas CNC Control. Sub Spindle. High Pressure Thru Tool Coolant To Both Spindles. Full "C" Axis For Both The Main And Sub Spindles. Collect Chucks On Both Spindles with 2-9/16" Thru Hole Actuators. . 10-Position Upper And Lower Turrets. Drives For Up To 10- Rotary Turret Tools In Turrets 1 And Turret 2. Y-Axis To The Upper Turret. LNS Quick Load Bar Feeder. Parts Catcher. Large Quantity Of Tool Holders Including (10) Live Toolholders. Chip Conveyor. Transformer. Manuals And Drawings.

SPECIFICATIONS:
WORKING CAPACITY (MAIN SPINDLE)
Spindle Capacity (Maximum Bar Diameter) 2-9/16"
Spindle Nose A2-6
Maximum Turning Length 17.7"
Spindle Speed Range 50-5000 RPM
Spindle Drive 25 HP
WORKING CAPACITY (SUB SPINDLE)
Spindle Capacity (Maximum Bar Capacity) 2-9/16"
Spindle Nose A2-6
Spindle Speed Range 50-5000 RPM
Spindle Drive 10 HP
Rapid Traverse & Contouring Rate 590 IPM
Maximum Travel 20.47"
C-AXIS FOR THE MAIN AND OPPOSED SPINDLES
Speed Range 0.01-80 RPM
Full C-Axis Capability .001° increments
TOOL TURRET #1/SLIDE #1 (ABOVE SPINDLE CENTERLINE)
Tool Positions 10
For Quick Change VDI Block Tooling VDI 30 DIN 69880
Driven Tools 10
TOOL TURRET #2/SLIDE #2 (BELOW SPINDLE CENTERLINE)
Tool Positions 10
For Quick Change VDI Block Tooling VDI 30 DIN 69880
Driven Tools 10
DRIVE FOR ROTATING TOOLS (BOTH TURRETS)
Drive 5.4 HP
Speed Range 200-4000 RPM
Maximum Stroke for Cross Drilling 2.360"
COMPOUND SLIDES WITH TURRETS - BOTH TURRETS
Slide Traverse (X-Axis)/Longitudinal (Z-Axis) for Slides 1&2 5.5" / 17.7"
Slide Traverse (Y-Axis) (Slide #1/Upper Turret Only) ±1.387"
Rapid Traverse and Contouring Rates (X/Y/Z Axes) 590/236/590 IPM
Approximate Weight 13,500 lbs

세부내역

Traub TNC65 DGY Opposed Spindle 7-Axis CNC Turning and Milling Center, LNS Quick Load bar Feeder, Well Tooled, 1996

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 TRAUB TNC65 DGY, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..