SANJIA 2MS2150호닝

ID#:384606
상표:SANJIA
모델:2MS2150
형태:호닝
조건:새로운에서 주식
년도:2016
제어:CNC (FANUC OR SIEMENS)
판매자:판매자가 누군지보기 ...
위치:Shandong
중국
가격:

투기

Lower:64
맨드랠 직경(최소):70 mm
맨드랠 직경(최대):500 mm
스트로크(최소):1,000 mm
스트로크(최대):15,000 mm
Upper:84
수평/수직:Horz
치수:2000X1600
제어반:CNC (FANUC OR SIEMENS)

Honing hole diameter range………………………100-500mm
Honing maximum depth…………………… 4m
(The honing maximum depth may according to the user request )
The spindle height of center……………to carriage bed body guide way 250mm
to work piece bed body guide way 450mm

Clamp workpiece diameter range……………150-600mm
Honing stem box spindle rotating speed range……………25—250r/min r/min(infinite)
Reciprocating movement speed range………3-20m/min(Stepless speed regulation)
The maximum traction of reciprocating movement……………30KN
Honing head expanding system pressure……………0.3-10Mpa
Main motor……………15kw(Ac spindle motor)
Reciprocating motor……………7.5kw(Ac servo motor)
Cooling pump motor……………250W X2
Cooling system flow……………100 x2 1/min
Honing head expanding oil pump motor……………1.5KW
Roughness: Ra≤0.2μm

세부내역

2MS2150 CNC powerful deep hole honing machine is a kind of special machine to process round deep hole . Workpiece will be fixed and honing head will rotate and reciprocately move. It is especially good to process non-rotate work piece such as square work piece, outside welded rotating axle or flanged work piece.
Rotation of honing head is AC stepless speed regulation. reciprocate movement is AC servo stepless speed regulation. The work piece will be fixed by a chian .
Work piece surface roughness after precise honing Ra≤0.2μm, roundness≤0.04-0.06mm

This machine has time relay and totalizer and it can control honing time and honing reciprocate times according to set value.

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 SANJIA 2MS2150, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..