OKUMA & HOWA ACT V60RCNC 선반

ID#:384865
상표:OKUMA & HOWA
모델:ACT V60R
형태:CNC 선반
조건:중고 - 우수
년도:2005
판매자:판매자가 누군지보기 ...
위치:Minnesota
미국
가격:

투기

Lower:84
척크기:15 "
#축:2
동력:40 hp
최대 RPM:2000 rpm
터닝 직경:24 "
스윙:27.6 "
가공 길이:26 "
Upper:104
심 압대:No
라이브 공구:No
서브 스핀들:No
치수:W 80.94" X L 101.96" X h 144.09
무게:20,900
제어반:CNC (FANUC 18iT)

Manufacturer: Okuma Howa
Model: V60R
Year: 2005

Specifications:
Date of Manufacturing 2005
Max Swing 27.6"
Maximum Cutting Diameter 24.00"
Maximum Cutting Length 26.00"
X Axis Travel 14.6"
Z Axis Travel 26.00"
Rapid Traverse Rate 944 IPM X and Z
Spindle Center Height From Floor 42.7"
Spindle Nose A2-11
Spindle Speeds, Infinitely Variable 20 - 2,000 RPM
Spindle Drive Motor 40/30 HP
Turret Type V 12
Floor space Required W 80.94" X L 101.96"
Machine Height H 144.09"
Machine Weight (Approximate) 20,900 Lbs.

Equipped With:
Fanuc CNC Control 18 IT
HOWA Hydraulic 3-jaw Chucks 15"
Some Standard tooling
High And Low Chucking Pressure (OPTION)
Chip Conveyor Rear Discharge
Coolant tank and pumps
Coolant thru the turret
480V / 38 KVA
All available Manuals
ROBOT INTERFACE
Original door to be put back on machine
This machine was rebuilt on 4/9/2012
WHAT WAS REBUILT ON MACHINE.
Disassemble Machine as necessary for Repair
Cleaned and inspected all parts for wear or damage and advise
Rebuilt spindle complete
Repair and replaced ball screws as needed
replaced all thrust bearings for ball screws
grind column ways flat Parallel and square
Machined back of saddle
Scraped saddle to match column ways
Grind ways on top of saddle flat, Parallel and Square
Machined vertical slide
Scraped vertical slide to Match top of saddle
Machined and scraped all gibs and hold downs
Cleaned out way lube system and replaced metering units as needed
replaced all way wipers
Assembled machine complete.

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 OKUMA & HOWA ACT V60R, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..