SIP MP5E지그 보링기

형태:지그 보링기
조건:중고 - 우수
Serial # :1202
Stock # :9819


테이블 크기 - W:31.25 "
테이블 사이즈-L:35 "
치수:96” L x 72” W x 94”H
무게:11,400 Lbs.

We are pleased to offer, subject to prior sale and our conditions of sale, the following for your consideration:
Very Low Hour
Pre-Owned High-Precision Sip Jig Bore Vertical Milling, Drilling & Boring Machine
Gantry Type Boring Mill Made in Switzerland
Model: MP-5E Serial No: 1202

General specifications are approximate and are subject to verification.

Diameter of Spindle: 3 47/64”
Spindle Speeds: 12 changes 55 to 2250 RPM
Drilling Feeds, Metric: 4 changes 0.04 – 0.21 mm
Drilling Feeds, Inch: 4 changes .0015 .003 .005 .008
Spindle Stroke: 7 3/32”
Spindle Taper: #4MT
Size of Table: 31 ¼” x 35”
Vertical Travel of Column: 29”
Longitudinal Table Travel Movement: 28”
Free Pass Between Machine Columns: 34 29/64”
Maximum Pass Between Table & Spindle: 37 ½”
Minimum Pass Between Table & Spindle: 7 7/8”
Main Motor: 5 HP
Electricals: 220/440 V 3 phase
(currently@440 Volts)
Max Table Load: 1,325 Lbs.
Approx. Weight: 11,400 Lbs.
Approx. Dimensions: 96” L x 72” W x 94”H

Complete with:
• Built in Feeds in all directions, Power Rapid Traverse in all directions, Factory standard set up
• Extensive Sip tooling package w/ boring heads, keyless drill chucks & boring bars, all in excellent condition.
o 2 each Sip Original Boring Head units, 3 ½” Wide Body, with 7/8” straight shank
o 4 each Albrecht Keyless Drill Chucks, w/integral MT # 4 Shank, original units
o 9 each Sip Original Boring Bar holders, individual boring bars with indexable inserts ranging from 5/8” to 2 3/8” diameter of the boring head.
• Built-in side dial indicator system for spindle head and table movement with clear bezels

Inventory No: 9819


Just received! Fine tool in rare condition. From long term stand by storage. Runs excellent. Flaking on ways is HIGHLY visible! Super smooth & quiet, dripping with Tooling

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 SIP MP-5E, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..