EMCO EMCOTURN 420 MC PLUS5 축 이상 CNC 선반

ID#:384915
상표:EMCO
모델:EMCOTURN 420 MC PLUS
형태:5 축 이상 CNC 선반
조건:중고 - 우수
년도:2004
제어:CNC (Siemens 840D)
판매자:판매자가 누군지보기 ...
위치:Indiana
미국
환불 정책:있는 그대로
가격:

투기

Lower:94
#축:6
바 용량:25.91 mm
동력:8.9 kW
최대 RPM:5000 rpm
터닝 직경:154.9 mm
Upper:114
스윙:339.9 mm
치수:86.7" x 59" x 86.7"
무게:5,720 Lbs
제어반:CNC (Siemens 840D)

Technical Data EMCOTURN 420 MC

Workspace
Swing above slide Ø160 mm (6.3")
Main spindle to counter-spindle 408 mm (16.1")
Max. turning diameter Ø100 mm (3.9")
Max. part length 600 mm (23.6")
Max. bar-stock diameter 26 mm (1.0")

Travel
Travel in X/Z 78 mm (3.1")
Travel in Y 210 mm (8.3")

Main spindle
Speed range 0 – 5000 rpm
Max. Torque at spindle 38 Nm (28.0 ft/lbs)
Spindle adapter Ø70 h5
Spindle bearing (inside diameter at front) Ø60 mm (2.4")
Spindle bore Ø38 mm (1.5")

Counter-spindle
Speed range 0 – 5000 rpm
Torque at spindle 38 Nm (28.0 ft/lbs)
Spindle adapter Ø70 h5
Spindle bearing (inside diameter) Ø60 mm (2.4")
Partially hollow clamp with chuck/jaws for dia. Ø 26 mm (1”) approx. 100 mm (3.9")
Travel (Z2) 233 mm (9.2")

C-axis
Resolution of rotary axis 0.001°
Rapid traverse 1000 rpm
Spindle positioning, all 4 spindles 3°

Drive power
Main spindle and counter-spindle 9 kW (12 hp) cont.

Tool changer
Number of tool stations 2 x 12
VDI shaft (DIN 69880) VDI 16
Tool cross-section for square-shank tools 16 x 16 mm (0.6 x 0.6")
Shank diameter for boring bars 25 mm (1")
Turret indexing time 0.4 sec

Driven tools
Speed range 0 – 5000 rpm
Max. Torque 3 Nm (2.2 ft/lbs)
Max. Drive power 1.6 kW (2.2 hp)
Number of driven tools 2x 4

Feed drives
Rapid traverse X/Z; X1/Z1 12/20 m/min (472/787 ipm)
Feed in X 3000 N (674 lbs)
Feed in Z 3000 N (674 lbs)
Acceleration time for 0 to rapid traverse X/Z 0.1 sec

Coolant system
Tank capacity 200 Liter (53 gal)
Pump power (optional) 0.57 (2.2) kW (0.8 (3) hp)

Power consumption
Connected load 15 kVA
Supply pressure 6 bar (87 PSI)
Supply rate 300 I/h (79 gpm)

Dimensions
Height of centers above floor, top/bottom 1179/1030 mm (46.4/40.6")
Machine height 2200 mm (86.6")
Footprint (without chip conveyor) W x D 2200 (86.6") x 1386 mm (54.5")
Total weight approx. 2900kg (6400 lbs)
Safety devices CE-compliant

세부내역

Machine has 2 main spindles and 2 subspindles and live tooling capabilities for both spindles.

The bar feeder feeds 2 bars at the same times to allow you to increase you thru put with minimal floor space.

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 EMCO EMCOTURN 420 MC PLUS, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..