TARNOW RUP 280 X500범용 원통 연삭기

ID#:385561
상표:TARNOW
모델:RUP 280 X500
형태:범용 원통 연삭기
년도:2000
판매자:판매자가 누군지보기 ...
위치:Pennsylvania
미국
Stock # :TK-20451
가격:

투기

Lower:55
스윙:304.8 mm
중심:508 mm
동력:5.6 kW
작업헤드 스핀들 속도:520 RPM
Upper:75
연마 휠 직경:406.4 mm
센터간 최대 무게:122.5 kg
치수:2290x2000x1800
무게:2600

SPECIFICATIONS

MAXIMUM SWING OVER TABLE: 12”
MAXIMUM OD GRINDING DIAMETER: 11”
MAXIMUM DISTANCE BETWEEN CENTERS: 20”
MAXIMUM WORKPIECE WEIGHT IN CENTERS: 270 LBS
MAXIMUM WORKPIECE WEIGHT IN CHUCKS: 44 LBS

GRINDING WHEEL
DIMENSIONS: 16” X 2” X 5”
MINIMUM WORN GRINDING WHEEL DIAMETER: 10.25”
GRINDING WHEEL SPINDLE SPEEDS: 1,850 – 2,180 RPM
MAIN DRIVE MOTOR: 7.5 HP

WHEELHEAD
SWIVEL ANGLE TOWARD FOOTSTOCK/WORKHEAD: 30°/30°
HANDWHEEL FEED STROKE: 6-3/8”
ADDITIONAL TRAVEL OF SLIDE PLATE: 2.36”
AUTOMATIC RAPID FEED STROKE: 2”

DISPLACEMENT OF WHEEL HEAD
PER REVOLUTION OF HANDWHEEL: .04”
PER ONE GRADUATION OF HANDWHEEL: .0001”
PER ONE GRADUATION OF FINE FEED KNOB: .000020”

INFEED RANGES
COARSE: .012” - .236”
FINE: .003” - .118”
AUTO INFEED RANGE AT TABLE REVERSAL: .001” - .0015”

INTERNAL GRINDING ATTACHMENT
MAXIMUM ID DIAMETER: 7-7/8”
MAXIMUM GRINDING LENGTH: 4-3/4”
SPINDLE SPEED RANGES (4): 5,706/8,560/10,000/15,000
17,120/30,000 RPM
INTERNAL GRINDING MOTOR: 1.5 HP

WORKHEAD
SWIVEL ANGLE TOWARDS OPERATOR/WHEEL: 30°/90°
CENTER TAPER: MT 4
SPINDLE HOLE DIAMETER: .86”
SPEEDS, LOW RANGE: 50/70/185/255 RPM
SPEEDS, HIGH RANGE: 100/140/375/520 RPM

TABLE
SWIVEL ANGLE TOWARDS WHEEL/OPERATOR: 12°/5°
TRAVESE SPEED, INFINITELY VARIABLE: 75 – 4,000 RPM
MINIMUM AUTOMATIC TRAVEL: 1/8”
SPARK OUT TIME, CONTROL RANGE: 0 – 10 SECONDS

HYDRAULIC FOOTSTOCK
MAXIMUM SPINDLE RETRACTION: 1”
CENTER TAPER: MT 4
MANUAL QUILL TRAVEL: 5/8”

세부내역

SONY 2-AXIS DRO
INTERNAL GRINDING ATTACHMENT
COOLANT SYSTEM WITH MAGNETIC SEPERATOR
CENTERS

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 TARNOW RUP 280 X500, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..