OKUMA VTM-2000YB5 축 이상 CNC 선반

ID#:385624
상표:OKUMA
모델:VTM-2000YB
형태:5 축 이상 CNC 선반
년도:2015
제어:CNC (OSP-P300SH)
판매자:판매자가 누군지보기 ...
위치:미국
가격:

투기

Lower:65
#축:5
척크기:2,000 mm
동력:37.3 kW
최대 RPM:10000 rpm
터닝 직경:2,000 mm
Upper:85
스윙:2,400 mm
가공 길이:1,400 mm
치수:235 x 274 x 168
무게:94798
제어반:CNC (OSP-P300SH)

Chuck Size 78.74"
Max Swing Over Bed 94.49"
Max Turning Diameter 78.74"
Max Turning Height 55.12"
Turning Spindle Speed 4 - 200 RPM
Turning Spindle Bore 4.33"
Turning Spindle Motor 40 / 30 HP
Turning Spindle Torque 6206 ft. lbs.
Tools 60
Milling Spindle Motor 50 / 40 / 30 HP
Milling Spindle Speed 40 - 10,000 RPM
Milling Spindle Torque 372 ft. lbs.
Milling Spindle Type Cat 50 Big Plus
Table Load Capacity 22,600 lbs.
Rapid Traverse Rates (X Y Z) 1260 IPM
X-Axis Travel 62.99"
Y-Axis Travel -31.5" to 31.5"
Z-Axis Travel 55.12"
C-Axis Index 0.001 Degree
B-Axis Travel -30 to 120 Degree
B-Axis Index .001 Degree
Max Tool Diameter 6.69" / 11.42"
Max Tool Length 19.69"
Max Tool Weight 40 lbs.
Machine Dimensions (L x W x H) 235" x 274.5" x 168"
Machine Weight 94,798 lbs.

FEATURES:
OSP-P300SH CNC CONTROL
15" Color TFT
B-Axis Milling Spindle Tilt (150 Degrees)
Milling Spindle Speed 10000 RPM
Turning Spindle Speed 200 RPM
78.7" Manual 8-Jaw Chuck
Enomoto Chip Conveyor (Left Side Exit)
MP Systems 1000 psi Coolant Thru Spindle
60 Tool Magazine
Remote Manual Pulse Generator
Renishaw Auto Tool Length Measurement
Auto Front Door Open / Close
Multi-Tap Transformer
Absolute Position Encoder (X, Y, Z Axes)
Three Color Tower Light
Off Center Turning Function
10 Sets Workpiece Coordinate System
Helical Interpolation
Rigid Tapping
B-Axis Slope Machining
Extreme Low Speed Cutting Function
Collision Audidance System
Thermal Active Stabilizer (Spindle & Construction)

세부내역

B-Axis Milling Spindle Tilt (150 Degrees), Milling Spindle Speed 10000 RPM, Turning Spindle Speed 200 RPM, 78.7" Manual 8-Jaw Chuck, Enomoto Chip Conveyor (Left Side Exit), MP Systems 1000 psi Coolant Thru Spindle, 60 Tool Magazine, Remote Manual Pulse Generator, Renishaw Auto Tool Length Measurement, Auto Front Door Open / Close, Multi-Tap Transformer, Absolute Position Encoder (X, Y, Z Axes), Three Color Tower Light, Off Center Turning Function, 10 Sets Workpiece Coordinate System, Helical Interpolation, Rigid Tapping, B-Axis Slope Machining, Extreme Low Speed Cutting Function, Collision Audidance System, Thermal Active Stabilizer (Spindle & Construction)

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 OKUMA VTM-2000YB, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..