FADAL 6535/50수직 머시닝 센터

ID#:386254
상표:FADAL
모델:6535/50
형태:수직 머시닝 센터
년도:2007
제어:CNC (FADAL )
판매자:판매자가 누군지보기 ...
위치:Michigan
미국
Stock # :103590
가격:

투기

Lower:26
X:1,651 mm
Y:889 mm
Z:787.4 mm
분당 회전속도:7500 rpm
# ATC:32
Upper:46
테이블 W:889 mm
테이블-L:1,905 mm
테이퍼:50
제어반:CNC (FADAL )

SPECIFICATIONS
FLOOR TO TABLE SURFACE: 41”
MACHINE WEIGHT: 32,000 LBS.
CONSTRUCTION: CAST IRON BOX WAY X/Y/Z
TABLE:
TABLE SIZE: 75” X 35”
T-SLOTS (NO. X WIDTH X SPAN): 7 X .709” X 4.921”
CUTTING FEED RATE (X/Y/Z): 600 IPM
MAX RAPID TRAVEL RATE (X/Y): 900 IPM
RAPID TRAVEL RATE (Z): 700 IPM MAX.
WEIGHT ON TABLE: 4,250 LBS
C BALL SCREW SIZE (X/Y/Z): 2.48“ DIA.
LONGITUDINAL (X AXIS): 65”
LATITUDINAL (Y AXIS): 35”
VERTICAL (Z AXIS): 31”
SPINDLE NOSE TO TABLE: 2.5”-33.5”
SPINDLE CENTER TO: 42”
ACCURACY: AXIS POSITIONING**: +/- .0002”
AXIS REPEATABILITY**: +/- .0001”
SPINDLE:
POWER TRANSFER: AUTOMATIC ELECTRONIC, 2 SPEED VECTOR DRIVE (1:1)
SPINDLE SPEED: 10-7,500 RPM
SPINDLE ORIENTATION: ELECTROMECHANICAL
SPINDLE TAPER: NO. 50
TOOLS:
ATC, NUMBER OF TOOLS: 32
TOOLS, 2.5 SEC. DATC ATC,
TOOL SELECTION:
RANDOM / BI-DIRECTIONAL MAX.
TOOL DIAMETER: 4.92” (WITHOUT ADJACENT TOOLS): 9.84”
MAX. TOOL LENGTH: 15.75”
MAX. TOOL WEIGHT: 39.68 LBS.
MOTOR:
SPINDLE DRIVE MOTOR: AC,
VECTOR DRIVE HORSEPOWER: 25 HP / 50 HP*
TORQUE:
147 FT.-LBS. / 300 FT.-LBS.*
AXIS DRIVE MOTOR (X/Y/Z):
AC, 5,000 LBS.*
THRUST MISCELLANEOUS:
AIR PRESSURE REQUIREMENT: 80-120 PSI, 15 SCFM (MOMENTARY)
POWER REQUIREMENT (3-PHASE): 41 A @ 480
VAC OPTIONAL SINGLE PHASE: NOT AVAILABLE
COOL POWER: SPINDLE,
HEADSTOCK, X,Y,Z
BALLSCREWS

EQUIPPED WITH
FADAL CNC CONTROL
CHIP CONVEYOR
HIGH SPEED CPU 7500 RPM
DUAL ARM TOOL CHANGER
32 POCKET TC FLAT PANEL
COLOR DISPLAY

세부내역

Fadal VMC-6535/50, (2007) Table 75" x 35", #50 Taper,65" x 35" x 31", High pressure Thru Spindle Coolant.