JOHNFORD SL-650ACNC 선반

ID#:390374
상표:JOHNFORD
모델:SL-650A
형태:CNC 선반
년도:2014
제어:CNC (FANUC 0iT-D CNC Control)
판매자:판매자가 누군지보기 ...
위치:미국
Stock # :26714
가격:

투기

Lower:30
척크기:381 mm
바 용량:102.1 mm
#축:2
동력:29.8 kW
최대 RPM:4000 rpm
Upper:50
터닝 직경:449.6 mm
스윙:579.1 mm
가공 길이:1,676 mm
심 압대:Yes
제어반:CNC (FANUC 0iT-D CNC Control)

Reference #26714


JOHNFORD SL-650A CSY CNC Turning Center With Live Milling
Age 2014
Model: SL-650A+CS+Y

FEATURES:
Very Low Hours - Hardly Used!
C-Axis Spindle Rotation
Y-Axis Turret Movement
Live Milling

CAPACITIES:
Swing Over Bed / Front Cover .......... 22.8"
Swing Over Cross Slide ................ 17.7"
Standard Turning Diameter ............. 17.7"
Distance Between Centers .............. 66"
X-Axis Cross Travel ................... 11.4"
Z-Axis Longitudinal Travel ............ 59.1"

SPINDLE:
Spindle Motor ......................... 40 HP High Torque
Spindle Nose .......................... A2-11
Spindle Speeds (with 12" Chuck) ....... 2800 RPM
Hole Through Spindle .................. 4.52"
Bar Capacity .......................... 4.015"
Spindle Bearing Diameter .............. 6.2"
Spindle Inside Taper .................. MT #7

TURRET:
Turret Tools .......................... 12
D.D. Tool Shank Size .................. 1"
I.D. Tool Shank Size .................. 1.5"
Index Time ............................ 3 Seconds

C-AXIS & LIVE TOOLS:
Spindle Motor ......................... 7.5 HP
Spindle Speeds ........................ 4000 RPM
C-Axis Increment ...................... 0.001 Degrees

TAILSTOCK:
Quill Diameter ......................... 3.35"
Quill Stroke ........................... 3.94"
Quill Taper ............................ MT #5
Tailstock Body Travel .................. 51.2"

FEEDS:
Rapid Traverse, XZ ..................... 787 IPM
Cutting Feed Rate ...................... 0.01"-315 IPM

WEIGHTS & DIMENSIONS:
Floor Space ............................ 205" x 82"
Approximate Weight ..................... 22,000 Lbs.

EQUIPPED WITH:
FANUC 0iT-D CNC Control
15" 3-Jaw Chuck
12-Station Live Tooling Turret
Full Contouring C-Axis Spindle
Y-Axis Turret Movement
Manual Swing Down Tool Presetter
Manual Turn Through Steady Rest, 2"-12" Capacity
Spindle Orientation
Hydraulic Programmable Tailstock Body & Quill
Chip Conveyor

LOCATION:
Under Power In Plant. Less Than 700 Hours Used!

세부내역

Johnford SL650A-CSY,23" Swing,66" CC,15" Chk, V12 Turret,Live Tools, Fanuc 0iTD, 2014,#26714

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 JOHNFORD SL-650A, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..