AMERICAN TOOL WORKS 2516-24-F3엔진 선반

ID#:390381
상표:AMERICAN TOOL WORKS
모델:2516-24-F3
형태:엔진 선반
조건:중고 - 우수
년도:1974
Serial # :79580
위치:South Carolina
미국
Stock # :UD100290
가격:

투기

Lower:30
스윙:33.5 "
중심:120 "
스핀들 보어:5.5 "
동력:30 hp
Upper:50
분당 회전속도:800 rpm
슬라이드 위 스윙:24 "
치수:6” (d) x 216” (l) x 83” (h)
무게:17,550

American Tool Inc., Model 2516-24F3, 32” x 120” Heavy Duty Engine Lathe, S/N 79580 (1974)

Specifications:

Swing over bed ways 33-1/2"
Swing over carriage wings 24”
Swing over cross slide 24"
Distance between centers 120"

Headstock:

Number of spindle speeds 27
Spindle speeds 12 - 800 RPM
Length on bed 32-5/8”
Spindle hole 2-1/2"
Headstock center #5
Radial load at 100 RPM front bearings 27,800 lbs
Spindle mount L2
Spindle center to floor 46-1/4”

Gearbox:

Number of threads and feeds 66
Threads per inch 1 - 60
Feeds per revolutions .0025 - .1506
Course threads per inch ½ - 30
Course feeds per revolution .0050 - .3012
Leadscrew diameter 2”
Lube system Cascading

Carriage:

Length on bed 35”
Bridge width 10”
Crosslide travel 15”
Top slide travel 6”

Bed & Tailstock:

Bed width x depth 20”-18-1/2”
Tailstock casting No split design
Tailstock spindle diameter 5"
Tailstock spindle travel 12"
Tailstock spindle length 29-5/16”
Tailstock center #5

General:

Motor 30 HP
Electrics 230/460v/3ph/60cy
Amps full load 45
Weight, machine only 17,525 lbs
Floor space (Per original layout) 76” (d) x 216” (l) x 83” (h)

Equipment & Features:

• 21” Buck 3-jaw “ADJUST-TRU”, steel body, 2-piece reversible jaws #2213RO13
• 24” Cushman 4-jaw independent, steel body, solid reversible jaws #100324L02D
• Chuck wrenches
• Taper turning attachment, plain bearing, hardened and ground ways
• Steady rest, plain jaw, 12”-20”
• Plain jaw heavy duty follow rest
• Small face plate, 12”
• Large face plate, 27”
• Bed ways, four-vee-way, hardened 61-63RC
• 4-way carriage rapid traverse
• 2-speed tailstock, 6 to 1 ratio
• Adjustable automatic feed stops in both directions
• Pre load bearing on leadscrew for threading both directions
• Chip pan, 18 gallon with coolant pump and system
• Round tool post holder set, single screw
• Jacobs drill chuck No. 20, 3/8”-1” capacity
• Heavy duty live centers #5MT
• 7” diameter bull nose center #5MT
• Boring bars
 7/8” x 12”, Insert
 1-1/8” diameter x 16-1/2”, Aloris CBB5-2
 1-1/2” diameter x 24”
 1-3/4” diameter x 18”, Insert
 2” diameter x 21-1/2” length
 2” diameter x 30” length
 3” diameter x 40” length
 3-3/4” x 42” length
• Aloris DA QC tool post w/ 11 holders
($3,800 cost today)

 DA1 turning and facing holder
 DA2 boring, turning and facing holder (2 ea)
 DA4 boring bar holder 1-1/2”
 DA7 universal cutoff & grooving holder
 DA8 threading holder
 DA9 multi-purpose holder
 DA10 knurling holder
 DA22 universal cart. turning/boring holder
 DA41 heavy duty 2” boring bar holder
 DA55 quick change drill holder #5 MT
• Machine manuals
• Tooling cabinet

Condition: Machine is in very good condition.

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 AMERICAN TOOL WORKS 2516-24-F3, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..