HECKERT FW-450 X 1800 APUG수직 & 수평 선반

ID#:390414
상표:HECKERT
모델:FW-450 X 1800 APUG
형태:수직 & 수평 선반
조건:중고 - 우수
년도:2002
Serial # :326295/154
판매자:판매자가 누군지보기 ...
위치:South Carolina
미국
Stock # :UD100295
가격:

투기

Lower:40
테이블 크기 - W:18.25 "
테이블 사이즈-L:71 "
Upper:60
치수:154 x 115
무게:12,000

WMW-HECKERT Model FW-450 x 1800 APUG Heavy-Duty Combination Horizontal/Vertical
Knee-Type Production Milling Machine, S/N 326295/154 (2002)

Standard Features & Equipment:
• Horizontal 20 HP motor
• 18 spindle speeds
• 45 to 2240 RPM
• #50 taper
• Inch calibrations
• Flood coolant system
• (2) guide way covers, X-axis
• Electrical for 460v/3ph/60cy operation
(24 volts at controls)
• Solid state pc logic
• Power drawbar w/safety innerlock on the
horizontal spindle
• 15 HP vertical spindle motor
• 18 spindle speeds
• 28 to 1400 RPM
• Pendant with push button control of 3 axis
• Electromagnetic reversing clutch drives
• Feeds & rapid travel in 3 axis
• Emergency stop button
• Automatic hydraulic backlash eliminator
• Adjustable cam controls
• Hardened square ways (knee and column)
• Set wrenches and service tools
• Operator/service manuals
• Automatic work cycles
(3-axis 2-axis consecutively)
 Intermittent feed milling
 Reciprocal milling
 Longitudinal & cross frame milling
 Longitudinal & vertical frame milling
 Automatic rise and fall of knee by .028 to
clear cutter in rapid travel

Specifications:
Working surface 18-1/4" x 71", Number of t-slots 6,
Width of t-slots 11/16", Distance between t-slots 2-1/2", Maximum weight of work piece 3,300 Lbs

Travels
Longitudinal travel 52", Cross travel 14", Vertical travel 24-3/4", Horizontal spindle:
Spindle drive 20 HP, Spindle taper #50, Diameter of front bearing 4-5/16", Number of spindle speeds 18, Range of spindle speeds 45 - 2240 RPM, Spindle center to table surface - max... 26-3/4", Spindle center to table surface - minimum 2", Spindle center to overarm support 6-5/16"

Motorized vertical over arm:
Spindle drive 15 HP, Spindle taper 50, Diameter of front bearing 4-5/16", Number of spindle speeds 18, Range of spindle speeds 28 to 1400 RPM, Spindle nose to table surface - maximum 32-7/8", Spindle nose to table surface - minimum 8", Spindle center to column ways - maximum 48", Spindle center to column ways - minimum 14"

Feeds:
Feed drive, 3 HP, Number of feeds 18,Range - longitudinal & cross - per min. .63" - 31.5", Range - vertical - per min. .20" - 10", Rapid travel - longitudinal & cross 124" per min., Rapid travel – vertical 40" Per min.

Coolant system:
Pump drive 1/8 HP, Delivery rate 2.6 Gal. Per min,
Sump capacity 12 Gallons

Electrical:
Connected load: 31.8 KVA, Amp load 100

Dimensions & weight:
Net weight 11,660 Lbs. Floor space - W x D x H . 154"W x 115"D x 100"H

Equipped with:
• 3-axis DRO system
• Power driven rotary table 315mm with ApAR-
III drive unit to table
• Universal indexing attachment ApTZ-II
• Aluminum operator work platform around
machine
• Tooling cabinet

Tooling:
• 8-1/2” Brown & Sharpe HD vises (2 ea)
• #50 taper end mill holders - 3/16”, 1/2”, 5/8”,
¾”, 1” (2 ea), 1-1/4” (2 ea)
• #50 taper shell mill holders – ¾”, 1” , 1-1/4”,
1-1/2” (2 ea)
• #50 taper holder to #3MT
• #50 taper holder to #5MT
• #50 taper holder to #33JT with Jacobs 18N
Drill chuck 1/8” – ¾” capacity
• #50 taper arbor, 1-1/2” x 30”
• #50 taper arbor, 1” x 24”
• #50 taper arbor, 1” x 18” (2 ea)
• #50 taper holder and boring head #6830S
• #50 taper holder w/ Kennametal 6” face mill
• #50 taper w/ B & S #256 collect chuck (3 ea)
• B & S #21 collects for #256 collet chucks
1/8”, 3/16”, ¼”, 5/16”, 3/8” (2 ea), ½”(4 ea),
9/16”, 5/8” (4 ea) , 11/16”, 7/8”

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 HECKERT FW-450 X 1800 APUG, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..