HECKERT FU-400 X 1600 APUG수직 & 수평 선반

ID#:390416
상표:HECKERT
모델:FU-400 X 1600 APUG
형태:수직 & 수평 선반
조건:중고 - 우수
년도:2004
Serial # :326211/201
판매자:판매자가 누군지보기 ...
위치:South Carolina
미국
Stock # :UD100356
가격:

투기

Lower:40
테이블 크기 - W:412.7 mm
테이블 사이즈-L:1,600 mm
Upper:60
치수:138"W x 139"D x 81"H
무게:9,000

HECKERT Model FU-400 x 1600 APUG Heavy-Duty Combination Horizontal/Vertical
Knee-Type Production Milling Machine, S/N 16.25

Price $ 49,500.00

“CONDITION–NEW NEVER USED”

Standard Features & Equipment:

• Horizontal 15 HP motor
• 18 spindle speeds
• 45 to 2240 RPM
• #50 taper
• Inch calibrations
• Flood coolant system
• (2) guide way covers, X-axis
• Electrical for 460v/3ph/60cy operation (24 volts at controls)
• Solid state pc logic
• Power drawbar w/safety innerlock on the horizontal spindle
• 15 HP vertical spindle motor
• 18 spindle speeds
• 28 to 1400 RPM
• Pendant with push button control of 3 axis
• Electromagnetic reversing clutch drives
• Feeds & rapid travel in 3 axis
• Emergency stop button
• Automatic hydraulic backlash eliminator
• Adjustable cam controls
• Hardened square ways (knee and column)
• Set wrenches and service tools
• Operator/service manuals
• Automatic work cycles (3-axis 2-axis consecutively)
 Intermittent feed milling
 Reciprocal milling
 Longitudinal & cross frame milling
 Longitudinal & vertical frame milling
 Automatic rise and fall of knee by .028 to clear cutter in rapid travel

Specifications:

Working surface ............................ 16-1/4" x 63"
Number of t-slots ........................... 5
Width of t-slots ............................ 11/16"
Distance between t-slots 2-1/2"
Maximum weight of workpiece................ 3,300 Lbs

Travels

Longitudinal travel ......................... 44"
Cross travel .............................. 14"
Vertical travel ............................ 21-3/4"

Horizontal spindle:

Spindle drive ............................... 15 HP
Spindle taper #50
Diameter of front bearing .................. 4-5/16"
Number of spindle speeds ....... 18
Range of spindle speeds ..................... 45 - 2240 RPM
Spindle center to table surface - maximum ... 23-3/4"
Spindle center to table surface - minimum ... 2"
Spindle center to overarm support........ 6-5/16"

Motorized vertical over arm:

Spindle drive ............................... 15 HP
Spindle taper.............................. 50
Diameter of front bearing 4-5/16"
Number of spindle speeds 18
Range of spindle speeds ..................... 28 to 1400 RPM
Spindle nose to table surface - maximum 32-7/8"
Spindle nose to table surface - minimum 8"
Spindle center to column ways - maximum 48"
Spindle center to column ways - minimum 14"

Feeds:

Feed drive 3 HP
Number of feeds 18
Range - longitudinal & cross - per min. ..... .63" - 31.5"
Range - vertical - per min. .20" - 10"
Rapid travel - longitudinal & cross 124" Per min.
Rapid travel – vertical 40" Per min.

Coolant system:

Pump drive .................................. 1/8 HP
Delivery rate 2.6 Gal. Per min.
Sump capacity ............................... 12 Gallons

Electrical:

Connected load: ............................. 31.8 KVA
Amp load 55

Dimensions & weight:

Net weight .................................. 8,600 Lbs
Required floor space - W x D x H ............ 138"W x 139"D x 81"H

Equipped with:

3-axis DRO system

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 HECKERT FU-400 X 1600 APUG, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..