SANJIA TS2125깊은 구멍 훈련

형태:깊은 구멍 훈련
조건:새로운에서 주식
판매자:판매자가 누군지보기 ...


드릴링 직경:80 mm
깊이 드릴링:12,000 mm

Range of boring hole Dia Φ50-Φ250mm
Range of drilling hole Dia Φ40-Φ80mm
Max boring &drilling depth 12000mm
Center height from horizental rail to spindle center 350mm
Headstock spindle hole Dia Φ75mm
Front spindle taper hole Φ85mm,1:20
Spindle rotation speed ,steps 42-670r/min 12 steps
Feeding speed (AC servo motor ) 5-300mm/min infinite
Carriage rapid moving speed 2.05m/min
Clamping Dia of workpiece 60-300mm
Main motor N=30kw, n=1460r/min
Drilling box spindle hole dia Φ100(before is 75)mm
Front spindle taper hole of drilling box Φ120(before is 85)mm,1:20
Drilling bar box spindle rotation speed ,steps 82-490r/min 6 steps
Drilling bar box motor: 30KW,
Feeding motor N= 4.4kW AC servo
Carriage rapid motor N=3kW,n=2880r/min
Cooling pump motor N=5.5Kw,n=1460r/min 4groups
Hydraulic pump motor N=1.5kW,n=1440r/min
Rated pressure of cooling system 2.5MPa
Volume of cooling system 100l/min; 100, 200,300,400l/min
Rated pressure of hydraulic system 6.3MPa
Max. Axis force for sealing head: 68kN
Max. Clamping force by sealing head on work piece: 20kN
Guide way width: 650mm


This machine can be used to process not only regular-shape work piece(round bar, square steel ) but also irregular-shape workpiece.
It is a kind of widely used deep hole processing equipment with high Accuracy and rigid and strong machine bed. The range of spindle rotation speed is large and feeding system is driven by AC servo motor so that it can be used for every kind of deep hole processing. Sealing head and workpiece clampig have stable hydraulic advice
2)Before processing , fix workpiece on a rectangular work platform at the side of headstock by special clamp . Workpiece on the platform can be placed at any angle and Through the clamp to ensure the accuracy of the angle, and then use the clamp to make it stable.

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 SANJIA TS2125, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..