DAEWOO LYNX 200LCCNC 선반

ID#:390824
상표:DAEWOO
모델:LYNX 200LC
형태:CNC 선반
조건:중고 - 좋은
년도:2000
제어:CNC (Fanuc 21iT)
판매자:판매자가 누군지보기 ...
위치:미국
가격:

투기

Lower:80
척크기:203.2 mm
바 용량:63.5 mm
#축:2
동력:11.2 kW
최대 RPM:4000 rpm
터닝 직경:210.8 mm
스윙:508 mm
Upper:100
가공 길이:533.4 mm
심 압대:Yes
라이브 공구:No
서브 스핀들:No
치수:101" X 63" X 65"
무게:7700 Lbs
제어반:CNC (Fanuc 21iT)

2000 Daewoo Lynx 200LC CNC Turning Center

Specifications:

Control..........................................................................................................Fanuc 21i-T
Swing Over .......................................................................................................Bed:20.1”
Max Turning Diameter................................................................................................8.3"
Max Turning Length.....................................................................................................21"
Axis Travel.................................................................................................................6.9”
Z Axis Travel.............................................................................................................21.7”
X Axis Rapid Traverse.....................................................................................1181 IPM
Z Axis Rapid Traverse.....................................................................................1417 IPM
Bar Capacity............................................................................................................2.625"
Chuck Capacity.........................................................................................................8.00"
Spindle Nose............................................................................................................A2-6
Spindle Motor........................................................................................................15 HP
Spindle Speeds.........................................................................................40-4,000 RPM
Number of Turret Positions..........................................................................................12
Approximate Dimensions...................................................................101" x 63" x 65"H
Approximate Weight........................................................................................7,700 Lbs

Equipped With:
Parts Catcher
Tool Setter
Tailstock (Disconnected/ Hydraulic Leak)
Chip Conveyor (Non Functioning)
3-Jaw, 8” Chuck
ATS Collet Chuck With Master Collet for S26 Pads
All Manuals
Bar Loader: LNS Quick Load S2

세부내역

2000 Daewoo Lynx 200LC CNC Turning Center With LNS Quickload Servo S2 Barfeed. Machine is in good shape and can be inspected under power. The tailstock is currently disconnected due to a hydraulic leak and the chip conveyor does not function. Options include: parts catcher, tool setter, tailstock, 8" chuck, ATS S26 collet chuck, and LNS Quickload Servo S2 barfeeder. Please contact Kurt Dahlberg at 989-233-9886 with any questions.

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 DAEWOO LYNX 200LC, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..