FASTI 225-32-6접지기

제어:CNC (Delem)
판매자:판매자가 누군지보기 ...
환불 정책:있는 그대로
Stock # :jr


최대 두께:6 mm
전체 길이:3,240 mm
전체 길이:3,226 mm
치수:210" x 115" f-b x 88" tall
무게:approx 17,500 lbs
제어반:CNC (Delem)

Maximum Capacity, Full Length Mild Steel .25”
Bending Length 127.5”
Smallest Inner Bend Radius (per DIN 6935 specification) 1.25 x Gauge
Minimum Flange Height (per DIN 6935 specification) 6 x Gauge
Clamping Beam Profile 45˚
Clamping Beam Stroke 13.78”
Clamping Beam Speed, Up 3.27”/sec
Clamping Beam Speed, Down 1.97”/sec
Clamping Beam Positioning Accuracy +/-.0004”
Folding Beam Adjustment 3.15”
Folding Beam Speed, Up 60˚/sec
Folding Beam Speed, Down 113˚/sec
Folding Beam Speed, Maximum 86.5˚/sec
Folding Beam Accuracy +/-1/2˚
Folding Angle Range 0 - 180˚
Bottom Beam Adjustment 3.15”
MAH25R Backgauge Range .394” – 63”
Backgauge Accuracy +/-.002”
Maximum Gauging Speed 13”/sec
Quantity of Gauge Fingers 10
Working Height 35.43”
Machine Height 88”
Machine Width 210”
Machine Depth with MAH25R 71”
Weight, approximate 17,000 lb.
Hydraulic Oil 37 gal.
Air Pressure 5 bar
Motor Drive Power 11.5 HP
Electrical, 3 phase 60 Hz 220/440
Clamping Force 44 tons
Rolling Footswitch
Safety Limit Switch in foot pedal for automatic upstroke of Clamping Beam
Light Beam in side frames for stopping folding beam when engaged
2 Emergency stops mounted on magnets with long cable to place anywhere
Automatic Hydraulic Tool Clamping
CNC Motorized Adjustment of Lower Beam for rapid changes in material thickness. Also allows the use of special radius tools.
CNC Motorized Crowning Adjustment for rapid changes in material thickness. Also allows the use of special radius tools.
CFP 120 control
• Calculation of material cutting length (out folded)
• Technology table for materials
• 12“ color-LCD-Touch-Screen-Display
• RAM 64 MB (for approx. 14,000 programs)
• 99 cycle repetitions
• Graphic tool memory for 10 tools
• Error detection
• Language: D/GB/F/NL/DK/FI
• Inch / mm programming
• Control on swivel arm
Backgauge system MAH25R:
• .394” – 63” range, with 2 rows of pop-up gauge fingers
• Driven by 1.5” diameter ball screw with dual precision linear guides
• Rollers in sheet supports to move material with minimum friction
• 10.5”/sec at +/-.002” positioning accuracy
Tooling (All full sets for 127.5” bending)
Clamping Beam:
• Sharp Nose Blade: SA-45˚, segmented, full 1/4” x 10’ capacity
• Tall 180mm/7.08 “C” Style Goats Foot tooling, segmented
Folding Beam:
• 42mm/1.65” segmented
Lower Beam:
• Tool machined with finger grooves to allow part gauging down to .393”


Under power ready to demo

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 FASTI 225-32-6, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..