Reference #26863 WELTER Model UHT-800 CNC Universal Bevel Gear Checker Serial No.: Age Model: UHT-800 SPECIFICATION: Maximum Gear Diameter ................. 31.5" Shaft Angle Between The 2 Spindles .... 45-180 Degrees Distance, Pinion Face To Center ....... 8.3"-22.45" Distance, Spindle Face To Center ...... 0-19.68" Driving Headstock Horiz. Movement ..... 2.362" Forward Driving Headstock Horiz. Movement ..... 7.086" Backward Maximum Hypoid Offset ................. 4.53" Diameter, Pinion Spindle Bore ......... 6" Taper Of Pinion ....................... 60 Taper Spindle Speed Pinion Headstock ........ 0-200 RPM Spindle Speeds ........................ 1000 RPM / 500 RPM Main Spindle Motors, S1/S6 ............ 5 HP / 6 HP Floor Space L x W x H ................. 145" x 106" x 78.74" Approx. Weight ........................ 24,200 Lbs. CNC CONTROL: Geartec CZ 4-Axis CNC Control For Pinion MD, Gear MD, Sliding Base, Pinion Offset BASIC SINGLE FLANK SOFTWARE: Single Flank Inspection With FFT Analysis Interface Software For Digital Tooth Contact Display Of Inspection Result With A Digital Camera FULLY AUTOMATED SINGLE FLANK OPERATION: Auto Stock Dividing Using Non-Contact Sensing System To Detect Tooth Gap Automatic Or Foot Actuated Clamping Of The Pinion Or Gear Automatic Positioning To Pre-Determined Baclash Best Backlash Positioning Based On Single Flank Running Characteristics Automatic Programming Of Single Flank Test Cycles Auto Movement To Pre-Determined Position For Bearing Pattern Inspection For Digital Image Capture Digital Image Capture With Automatic Storage Of The Image With The Single Flank Data Inspection Report AUTOMATED FUNCTIONS: The Operator Brings Gear And Pinion Manually To The Machine Or Robot Automatic Or Manual Clamping Of The Pinion And Gear Automatic Find Correct Position Of Tooth Gap By Non-Contact Position Sensors Inspection Of Angular Position Of Gear And Automatic Position Of Respective Axes Automatic Approach To Pre-Determined Backlash. Automatic Cycle Start Of Single Flank Inspection For Respective Positions Automatic Machine Movements To Test Pattern Position For Bearing Pattern Inspection For Digital Imaging Capture Digital Image Capture Of Contract Pattern & Automatic Saving Of Digital Imate To The Test File