FOREST LINE SL-360플레이 너 유형 밀스

ID#:392164
상표:FOREST LINE
모델:SL-360
형태:플레이 너 유형 밀스
조건:중고 - 우수
년도:2012
제어:CNC (SIEMENS 840 DSL)
판매자:판매자가 누군지보기 ...
위치:프랑스
가격:

투기

Lower:12
테이블 W:21.4 m
테이블-L:2.5 m
레일 아래 높이:3.5 m
하우징 간 거리:3.6 m
Upper:32
전동기:44.7 kW
분당 회전속도:2000 rpm
제어반:CNC (SIEMENS 840 DSL)

Machine Type: PORTAL MILLING MACHINE
Make: FOREST LINE
Type: SL 360
Retrofited in: 2012

Slide, electric and electronic parts, motors and CNC are news

* RAM: (2 sets)
➢ The RAM are cast.

➢ Driving by a ball screw with double preloaded nuts with hydraulic balancing system.

➢ With guide pads & anti-friction materials.

Table:
➢ Dimensions 21 400 x 2 450 mm
➢ Table travel 21 450 mm

Travels:
➢ X AXIS (Longitudinal) 21 450 mm
➢ Y1 & Y2 axis (Breastplate) 4 600 mm
➢ Z1 & Z2 axis (RAM) 1 000 mm
➢ W axis (Crossrail) pitch of - 254 mm (x6) 1 500 mm

Main machine dimensions:
➢ Distance between upright 3 600 mm
➢ Maxi distance between Spindle nose and Floorplates 3 500 mm

Main spindle:
➢ Maxi power 50 kW
➢ Maxi torque 4 000 Nm
➢ Maxi Spindle speed 2 000 rpm
➢ Taper ISO 50
➢ Coolant (To define)
➢ RAM section 460 x 460 mm
➢ Mini distance between 2 RAM 1 700 mm
➢ Indexing system for automatic attachment of accessories positioned on teeth Hirth.

Axis measurment:
➢ X and Y axis are equipped with absolute encoders, the Z axis with linear scales Heidenhain pressurized.

Removable milling accessories:
➢ Milling accessories are loaded in the automatic mode, type pickup at one end of the machine.
➢ The accessory is retained and stored on the carriage and placed manually to the position of pickup.

* 2 SETS: Angle drive head
Power 45 kW
Taper ISO 50
Indexing 4 x 90°
Coolant throught tool

* 2 SETS: Universal head
Power 22 kW
Taper ISO 50
Indexing (Around Z axis) 4 x 90°
Spindle indexing every 2,5° in +/- 120°

* 2 SETS: Extension Milling head
Power 22,5 kW
Taper ISO 50
Coolant throught tool
Ratio 2/1
Spindle speed 4 000 rpm

* 1 SET: 5 AXIS HEAD
Head type TWIST
Indexing – In continuous on A and B axis 360 000°

* Manual carriage to store accessories
➢ 2 x Interfaces plates
➢ 2 x Angles drive
➢ 2 x Universal head
➢ 2 x Extension head

CNC SIEMENS 840 DSL

➢ Electric equipment
- Electrical cabinets composed of several modules
- Boxes on Machine
- Binding machine / cable tray with cabinet / Schneider brand components
- Electrical standards following European standards / Power supply 3 x 380 V / m - 50 Hz
- Cabinet with air conditioning for protection of electronic and electrical circuits
- Protection IP 55 motors / Lighting workstation per lamp WALDMANN

➢ CNC Module
- This module receives the interface modules
- Protection PLC inputs / In front of the cabinet outlet binding / Rs 232 C

➢ Control Module
- This module receives the control power interface relay asynchronous motors
- Protections associated / Centralization of information on terminal

➢ Module VAR axis
- This module receives the axis drives with the controls and related protection
- Module High Performance cards X and Z axis

➢ Power Module
- This module receives the spindle drives with the controls and related protection
- The lower part is reserved for the transformer
- The upper part is reserved to: Main switch / Power Relay / Supports fuses

* Chip conveyor
2 longitudinal chip conveyors along the X axis with gooseneck dump height 1 500 mm

다운로드

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 FOREST LINE SL-360, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..