FANUC ROBODRILL ALPHA T21IF드릴링 및 탭핑센터

ID#:393362
상표:FANUC
모델:ROBODRILL ALPHA T21IF
형태:드릴링 및 탭핑센터
제어:CNC (Fanuc 31i-A5 5-Axis CNC Control)
판매자:판매자가 누군지보기 ...
위치:미국
Stock # :27043
가격:

투기

Lower:33
X:499.9 mm
Y:399.8 mm
Z:327.7 mm
동력:5.6 kW
Upper:53
분당 회전속도:10000 rpm
# ATC:21
테이퍼:BT-30
제어반:CNC (Fanuc 31i-A5 5-Axis CNC Control)

Reference #27043

FANUC Robodrill Alpha T21iF CNC Drilling and Tapping Center
Serial No.: P085WG765
Age 2008
Model: Alpha T21iF

FEATURES:
Fanuc 31i-A5 5-Axis CNC Control
Tsudakoma TN-131 Tilting and Rotating CNC Rotary Table (4th/5th Axis)
21-Station Automatic Toolchanger

CAPACITY:
X-Axis Travel ......................... 19.68"
Y-Axis Travel ......................... 15.74"
Z-Axis Travel ......................... 12.9"
Table Working Surface ................. 15.74" x 25.6"
Max Table Load ........................ 660 Lbs.
Distance from Floor to Table .......... 30.9"
Max Distance Spindle to Table Top ..... 23.2"
Min Distance Spindle to Table Top ..... 10.2"
Spindle Speeds, Inf. Variable ......... 10 to 10,000 RPM
Max Spindle Speed for Tapping ......... 5,000 RPM
Spindle Taper ......................... BT-30
Rapid Traverse (X,Y,Z-Axes) ........... 2125 IPM
Feed Rate (X,Y,Z-Axes) ................ 1181 IPM
Tool Changer .......................... 21 ATC
Maximum Tool Diameter ................. 3.14"
Maximum Tool Length ................... 9.8"
Maximum Tool Weight ................... 33 Lbs.
Torque, Up To ......................... 52 Ft. Lbs
Rigid Tapping Speed ................... Up To 8000 RPM
Tool Change Time ...................... 0.9 Sec Tool-To-Tool

2-AXIS TSUDAKOMA CNC ROTARY TABLE:
Model ................................. TN-131
Table Diameter ........................ 5.31"
Spindle Size .......................... 3.54"
Spindle Height ........................ 8.26"
Center Height ......................... 5.90"
Min/Max Tilt Angle w/o load ........... -17 Degrees to 107 Degrees
Load Capacity (Horizontal) ............ 77 Lbs.
Load Capacity (0 to 90 Degree Tilt) ... 44 Lbs.
Rotation/Tilt Speed ................... 41.6 RPM/16.6 RPM

EQUIPPED WITH:
Fanuc 31i-A5 5-Axis CNC Control
AI Contour Control II (Hi Speed/Hi Precision 5-Axis Package)
""Big Plus" Dual Contact Spindle (Four Bearing Design) - High Torque
4.33" Factory Extended Column Riser for Additional Z-Axis Height
Tsudakoma TN-131 2-Axis CNC Rotary Table
Northfield 3-Jaw Chuck with Pneumatic Clamping
(2) Valve Pneumatic Package
High Pressure Through Spindle Coolant
Large Capacity Coolant Tank (200 Liter)
Automatic Lubrication
5/7.5/16.5 HP (Continous Duty/10 Min./1 Min.) AC Spindle Drive Motor

세부내역

Fanuc Robodrill Alpha T21iF, X-19.68", Y-15.74", Extended Z, 10,000 RPM, Fanuc 31i-A5, Tsudakoma CNC 4th/5th Axis, 2008, #27043

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 FANUC ROBODRILL ALPHA T21IF, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..