Input: Single-phase 115 – 230 - 277 Vac
Output Selectable Load:12 Vdc 15A; 24 Vdc 10A Output Battery charging: 12 Vdc 15A; 24 Vdc 10A Suited for the following battery types: Open Lead Acid, Sealed Lead Acid, lead Gel and Ni-Cd Automatic diagnostic of battery status, Battery Life Test function (internal Battery Impedance)
Charging curve IUoU, constant voltage and current Four charging levels: Boost, Absorption, Trickle, Recovery
Protected against short circuit and inverted polarity Signal output: for battery Fault, Mains or Back-UP Modbus RTU for all parameter battery and system Protection degree IP20 ; Space saving
Power Management: Thanks to the All In One units (DC-UPS), it will be possible to optimize power management. The available power is automatically allocated between load and battery, supplying power to the load is the first priority of the unit thus it is not necessary to double the power, because also the power going to the battery will go to the load if the load so requires. The maximum available current on the load output is 3 times the value of the device rated current In.
Battery Cater: it’s the concept base on algorithms that implement rapid and automatic charging, four state of charge, battery charge optimization during time, flat batteries recovery and real time diagnostic during installation and operation. The Real Time Auto-diagnostic system, monitoring battery faults such as, battery Sulfated, elements in short circuit, accidental reverse polarity connection, disconnection of the battery, they can easily be detected and removed by help of Blink Code of Diagnosis Led; during the installation and after sell. The continuous monitoring of battery efficiency, reduces battery damage risk and allows a safe operation in permanent connection. Each device is suited for all battery types, by means of jumpers it is possible setting predefined curves for Open Lead Acid, Sealed Lead Acid, Gel, Ni-Cd(option). They are programmed for two charging levels, boost and trickle, but they can be changed to single charging level by the user. A rugged casing for DIN rail mounting, IP20 protection degree. They are extremely compact and cost- effective.