HOFLER RAPID 1500기어 연마기

ID#:393735
상표:HOFLER
모델:RAPID 1500
형태:기어 연마기
조건:중고 - 좋은
년도:2003
판매자:판매자가 누군지보기 ...
위치:Illinois
미국
Stock # :gh1500x
가격:

투기

Lower:73
최대 기어 지름 :59.06 "
Upper:93
제어반:CNC (Hofler BWO )

Hofler Rapid 1500 7-Axis CNC Profile Gear Grinder

S/N: 820 New: 2003

EQUIPPED WITH:
Hofler BWO CNC controls version 4.51 complete with full CRT, operators pendant, keyboard. Internal grinding attachment complete with drive. Mounting hardware, swing away center. (2) column mounted support rings. Hofler 2-wheel rotary diamond wheel dresser. Hofler on-board gear analyzer with (3) sets of inspection disks. Hofler/Interlut Stuf coolant and filtration system complete with paper filtration and cartridge filtration. Industrial mist collector. EF chiller. Approx. (6) Hofler Dr. Kraiser diamond wheels. Large qualities of new and used grinding wheels and hubs. Repair parts, tooling and manuals.

SPECIFICATIONS:
Tool Data G3 (Internal Toothing)
Max. Outside Diameter Of Grinding Wheel - Dressable 300mm
Min. Diameter Of Grinding Wheel At The Shoulder - Dressable 150mm
Grinding Wheel Width 45mm
Speed Of Grinding Spindle 0-4187 1/Min.
Dressing Roll Diameter 200mm
Grinding Stroke (With External Toothing) 1500mm
Immersion Depth (With Internal Toothing) G3 400mm
Grinding Spindle Drive 14 (24) kW
Table Load 6000 kg Maximum
Operating Capacity 50 kVA
Compressed Air Supply Pre-Pressure 6-8 bar
Compressed Air Supply Consumption 5 m3/h
Workpiece Data (External Toothing)
Circle Diameter da max. 1500mm
Root Circle Diameter df min. 50mm
Number Of Teeth unlimited
Profile Height 41mm Maximum
Module (Dependent On The Toothing Data) Approx. 1-18mm Min.-Max.
Profile Height Extended 60mm Max.
Module (Dependent On The Toothing Data) Approx. 1-25mm Min.-Max.
Profile Height Extended 80mm Max.
Module (Dependent On The Toothing Data) Approx. 1-34mm Min.-Max.
Helix Angle Left/Right 45 degrees Max.
Tool Data (External Toothing)
Max. Outside Diameter Of Grinding Wheel - Dressable 400mm
Min. Diameter Of Grinding Wheel At The Shoulder - Dressable 184mm
Min. Diameter Of Grinding Wheel At The Shoulder-Dressable
(With 24 kW Grinding Spindle) 204mm
Grinding Wheel Width (Standard) 60mm Max.
Grinding Wheel Width (Special) > 60-90mm
Speed Of Grinding Spindle 0-4000 1/Min.
Dressing Roll Diameter (Standard) 160mm
Dressing Roll Diameter (With Extended Profile
Height Up To 60mm) 200mm
Dressing Roll Diameter (With Extended Profile
Height Up to 80mm) 240mm
Speed Of Dressing Spindle 0-5400 1/min
Workpiece Data G3 (Internal Toothing)
Tip Circle Diameter da 500mm Minimum
Profile height 40mm Maximum
Maximum Workpiece Height Above Workpiece Table 3100mm
Grinding Stroke 1500mm
Upper Edge Of Workpiece Table 300mm

세부내역

Hofler Rapid 1500 7-Axis CNC Profile Gear Grinder, Hofler BWO CNC, 1500 max. dial, 3100 max. workpiece ht., ID attachment, Hofler dresser, On-Board analyzer, coolant & filtration, 2003

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 HOFLER RAPID 1500, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..