OKUMA LS엔진 선반

ID#:393763
상표:OKUMA
모델:LS
형태:엔진 선반
조건:중고 - 좋은
판매자:판매자가 누군지보기 ...
위치:Massachusetts
미국
Stock # :2133
가격:

투기

Lower:73
스윙:21 "
중심:57 "
스핀들 보어:2 "
동력:10 hp
Upper:93
분당 회전속도:1800 rpm
슬라이드 위 스윙:13.7 "
치수:47" x 118" x 52"
무게:5500 lb.

1-(used) 21" x 59" Okuma Model LS Lathe, New 1970's.

SPECIFICATIONS:
Swing over bed.................................. 21.2"
Swing over cross slide.......................... 13.7"
Distance between centers.......................... 59"
Hole thru spindle.................................. 2"
Spindle nose camlock............................ D1-6"
Spindle speed range (12)................ 35 - 1800 RPM
Longitudinal feed range (32)......... 0.001 - .028 IPR
Cross feed range (32)................... 0.001 - .014 IPR
Threading range, English................... 4 - 56 TPI
Threading range, Metric.................... 0.5 - 7 mm
Tailstock spindle travel........................... 6"
Tailstock spindle taper.......................... #4MT
Dimensions (approx.)....................... 110" x 48"
Weight (approx.)............................ 5,500 lb.

EQUIPPED WITH:
12" 3-Jaw chuck
15" 4-Jaw chuck
Steady rest
Inch/metric threading
Aloris toolpost
Tailstock
Bed stop
Manufacturing stop
Thread dial indicator
Hardened & ground bedways

세부내역

Okuma Model LS 21" x 59" Lathe, 13.7" Swing Over Cross Slide, 2" Hole Through Spindle, D-1-6" Camlock Spindle Nose, 35 – 1800 RPM, Inch/Metric Threading, 10 Hp, 12" 3-Jaw Chuck, Steady Rest, Tailstock, Hardened & Ground Bed Ways, Aloris Tool Post, New 1970's.

이 모델에 대해 더욱

더많은 정보를 보기 위해서는 OKUMA LS, 리뷰포함, 브랜드 정보, 사진, 비디오 등, 여기를 클릭하세요..