KELLENBERGER KEL-VARIA RS 225/1000일반 및 앵글 헤드를 포함하여 원통 연삭기

세부내역

UNDER POWER IN AEROSPACE FACILITY IN EXCELLENT RUNNING CONDITION. OPERATOR SAYS SHOULD HOLD .000050" TOLERANCE. THEIR PART CALLS FOR +/- .00015" * B-AXIS WHEELHEAD * WORKHEAD WITH LIVE SPINDLE * TAILSTOCK * KELCO 90 CONVERSATIONAL CNC CONTROL * 20" DIA. x 3-5/32" W WHEEL WILL INCLUDE * ABOUT 8 SPARE WHEEL HUBS * STEADY REST

투기

미터에 사양 변환
스윙
17.7 "
중심
39.4 "
플레인 또는 앵글 헤드
Angle Head
연마 휠 직경
20 "
드레서(예/아니오)
Yes
치수
12' x 7'
무게
12,200 lbs
제어반
CNC (Kelco 90 Conversational)

KELLENBERGER KEL-VARIA RS225/1000 CNC CYLINDRICAL GRINDER WITH KELCO 90 CONVERSATIONAL CNC CONTROL

MAKE: KELLENBERGER
MODEL: KEL-VARIA RS 225/1000

NEW - 1997

CNC CONTROL:
• Kelco 90 (Conversational)


Center Height: 8.85" (225 mm)
Max. Swing: 17.7" (450mm)
Max. Between Centers: 39.4" (1000 mm)
Grinding Length: 39.4" (1000 mm)
Weight of Workpiece: 485 lbs( 220 kg)
Workhead Spindle Speed: 1220 RPM
Grinding Wheel Diameter: 19.6"

B-AXIS WHEELHEAD SWIVELING:

• Swiveling System for Manual Indexing Division 2,5deg. : -30deg. …... 180 deg.
• Swiveling System for Automatic Indexing Division 2,5 deg. -30 deg. ... 180 deg.
• B-Axis Resolution: 0.1” -205 deg. to +30 deg.

WHEELHEAD:
Grinding Wheel Max.: 20” x 3-5/32” (500mm x 80mm)
Peripheral speed max. 6300 ft min (32 ms)

WORKHEAD WITH LIVE SPINDLE:
• Swiveling Range -30deg. ……. +120 deg.
• Spindle Speed (Infinitely Variable) 5 - 500rpm
• Holding Cone Standard MT #5

LOWER TABLE: ( Z-Axis)
Distance between centers: 39-3/8” (1000mm)
Max. Travel: 45” (1150mm)
Max. Speed: 49 ft min (15 m min )
Max. Resolution: 0.0039”

UPPER TABLE:
Distance Between Centers: 39-3/8” (1000mm)
Swiveling range: 0…+9 deg.

CROSS SLIDE (X-Axis):
Max. Travel: 12-19/32” ( 320mm)
Max. Speed: 25ft min ( 7.5 m min)
Max. Resolution: 0.0039”

WHEELSLIDE: X-Axis
Travel: 12.59" (320 mm)
Rapid Traverse Speed: 7.5 m/min

WORKHEAD WITH LIVE SPINDLE (NO CHUCK):
Permissible Load: 320Nm (Including Chucks)
Weight of Workpiece
when grinding between
centers: : 485 lbs (220)
Rotational spindle speed: 8 - 800 rpm?

TAILSTOCK:
Holding Cone: MT4
Lift of Tailstocks sleeve: 2” (50mm)

DRIVE MOTORS:

Cross Slide (X-Axis) 3000 rpm / .95kW

Swiveling System:
• For Automatic Indexing: 3000rpm / .63 kW
• B-Axis: 3000rpm / .63 kW

Grinding Spindle: 1800rpm / 9 kW

Lower Table (Z-Axis) 2000rpm / .94 kW

Work Head w/live spindle 3000rpm / 3.1 kW

Hydraulic Pump 1800rpm / 0.44 kW

Hydrostatic Pump 1800rpm / 0.44 kW

INCLUDES:

Measuring System:
Gap Control: KEL-TOUCH
Active. Long. Positioning: Movomatic
Passive Long. Positioning: Movomatic
* Coolant with slurry separator
* Steady rest
* In-process gauging


REQUIRED FLOOR SPACE:

L x W: 12’ x 7’ ( 3600 x 2000mm)
Approx. Weight: 11,200 lbs

판매자에 대해

보기 회사 정보