ARONSON "SKYHOOK" 2500 LB WELDING POSITIONER
Model RHS10/T2.5-30SD/RLA-CY, New 1986, S/N 869
Stock # K11791
MACHINE DISCRIPTION: The Aronson "SKYHOOK" is Designed to give you
Full 360 Degrees of Tilt along with 360 Degrees of Rotation. This is
accomplished by Mounting a Turn Table onto a Horizontal Beam and then
Mounting the Horizontal Beam onto a Headstock. The Beam is Mounted 24"
Below the Tilt Axis of the Headstock and the Turn Table Center is 30"
From the Headstock. The Turn Table is 38" in Diameter and uses
Pre-loaded Slew-ring roller bearings which provides an 18-1/2" Diameter
Thru-Hole in the Table. Both Axis are equipped with Getty's Servo Motors
and Feedback Encoders.
EQUIPPED WITH: 38" Table with (4) 3/4" Radial T-Slots, 18.5" Thru-Hole,
Getty's Servo Motors and Encoders, Automatic Backlash Control, Auxiliary
Brake on Input Shaft, Zero Pin and Visual Zero Indicator, NEMA Dust