AKARI HMC HS-450I
2010 Akari Seiki HS-450I Horizontal CNC Machining Center, Full 4th Axis, TSC, ChipBLASTER Coolant Pump, Automatic Pallet Changer, Chip Conveyor
AVEREX HS-450I
AVEREX HMC HS-450i HORIZONTAL MACHINING CENTER WITH FANUC SERIES 31i CONTROL http://www.averexcnc.com/en/HS-450i/MainFeatures.html
DAEWOO ACE 500
Daewoo Ace H-500 HMC, 1998 – Chip Conveyor, Fanuc Control
DAEWOO DHM 500
DAEWOO DHM 500, built in 2002. With it's 6,000 RPM spindle, it's equipped with 31.5" X, 25.6" Y, 25.6" Z specifications. It boasts a 60 ATC, and CAT 50 taper. The pallet dimensions are W:19.7" and ...
DAEWOO DMH-500
Daewoo DMH-500 500 MM HMC, 2000- Chip Conveyor, Hydraulic Clamping, Fanuc Control, Rigid Taping
DIXI DHP50-4X
Great condition, was replaced by a new machine and was making good parts the day it was taken out of service. Reported to be holding 2 tenths. Low hours on this beautiful machine. Only 11500 cuttin...
DMG MORI NHX 4000
Mori Seiki NHX-4000, X-22",Y-22",Z-26", 15k RPM, (2) 15" x 15", #40, MG Mori ERGOline Touch CNC, 4-Avail. 2019, #43051
DMG MORI NHX 4000
DMG Mori Seiki NHX 4000 Horizontal Machining Center With RPP- 5 Pallet Pool System, 120 Station Twin- Arm Tool Changer, M730BM Control, Through-Spindle Coolant, 12,000 RPM Spindle Stock: Manufactur...
DMG MORI NHX 4000
DMG Mori Seiki NHX4000, 4-Axis, DMG 840 CNC, Dual 16" Pallets, 12K RPM, Thru-Spindle Coolant, Chip Conv., 2013, #43063
DMG MORI NHX 4000
Mori Seiki NHX-4000, X-22",Y-22",Z-26", 15k RPM, (2) 15" x 15", #40, MG Mori ERGOline Touch CNC, 4-Avail. 2019, #43050
DMG MORI NHX 4000
Mori Seiki NHX-4000, X-22",Y-22",Z-26", 15k RPM, (2) 15" x 15", #40, MG Mori ERGOline Touch CNC, 4-Avail. 2019, #43049
DMG MORI NHX 4000
DMG Mori Seiki NHX4000, 4-Axis, DMG 840 CNC, Dual 16" Pallets, 12K RPM, Thru Spdl Cool, Chip Conv, 2013, #43061
DMG MORI NHX 4000
Mori Seiki NHX-4000, X-22",Y-22",Z-26", 15k RPM, (2) 15" x 15", #40, MG Mori ERGOline Touch CNC, 4-Avail. 2019, #43052
DMG MORI NHX 4000
22"X, 22"Y, 26"Z, DMG Mori, NHX4000, 2013, CNC Horizontal Machining Center
DOOSAN NHP 4000
Doosan NHP 4000 Horizontal Machining Center, with 12 Tombstone Linear Pallet System
DOOSAN NHP 4000
Super clean 2019 Doosan NHP 4000 machine is well equipped with full 4th, 15,000 RPM & (2) tombstones.
DOOSAN NHP 4000
· Machine was installed in august of 2020. · The machine has 5300 hours on it · It will come with all 12 tombstones and some of the orange vise vises you see in the images · Travels are 22 x 25....
DOOSAN NHP 4000
Doosan NHP 4000 CNC HMC, 2019 – 4-Axis 12 Pallet LPS, 275 Tool Matrix
HAAS EC-500
70 Station Tool Changer Coolant Thru Spindle Tool Touch Setter Coolant Tank & Pump
HAAS EC-500
2O" X 20" PALLETS Haas CNC Controls Full 4th Axis pallet index 12,000 rpm Cat 40 spindle 40 Station Tool Changer Coolant Thru Spindle Tool Touch Setter Coolant Tank & Pump Chip Conveyor
HITACHI SEIKI HG-500II
CNC Horizontal Machining Center
HYUNDAI KIA HS400
2010 Hyundai Kia HS400 Horizontal CNC Machining Center, High-Pressure TSC, Chip Conveyor, Spindle Oil Cooling, Rigid Tapping
HYUNDAI KIA KH50G
1000 PSI HIGH PRESSURE THRU SPINDLE COOLANT, 2 SPEED GEARED HEADSTOCK, 60 ATC TOOL CHANGER, CHIP CONVEYOR, RIGID TAPPING, SPINDLE CHILLER, SPINDLE LOAD METER, SPINDLE RPM METER,
JOHNFORD HMC-500H 3 AXIS HORIZONTAL
3 Axis, 50 Taper, One Degree, Coolant Through Spindle, 8000 RPM, Fanuc 18iMB CNC
KIWA KH-45 G
2006 Kiwa CNC Horizontal Machining Center With Full 4th Axis and 6 Station Pallet Pool. Machine is in good shape and can be inspected under power as needed.
KIWA KH-45 G
2006 USED “KIWA” HORIZONTAL MACHINING CENTER, FULL 4TH AXIS MODEL: K45G with Fanuc 31i-A & 80 tools ATC The machine is excellent condition. SPINDLE RUN HOURS: Less than 6,543 HRS. only.
KIWA KH-4500
Kiwa KH-4500 HMC, 2017 – 15,000 RPM, 8 Pallets, 4th Axis, HP Coolant, 240ATC, Probe, Chip Conveyor, Auto Tool Breakage Detection
KIWA KNH-426X
2004 Kiwa KNH-426X CNC Horizontal Machining Center With Full 4th Axis. Machine is in good condition and can be inspected under power as needed.
KIWA KNH-426X
KIWA KNH-426X HMC, 2003-HPC, Fanuc Control, 12,000RPM, Chip Conveyor
KIWA KNH-426X
KIWA KNH 426X CNC HORIZONTAL MACHINING CENTER NEW: 2004 | JS 85474
KIWA KNH-426X
23.6" X Axis 24" Y Axis Kiwa KNH-426X HORZ MACHINING CENTER, Fanuc18iMB 4-Axis Cntrl,6-Pallets,120 ATC,12,000R