AMERICAN 26" X 96" ENGINE LATHE
26" Swing, 18" Over Cross Slide, Steady Rest, Heavy Duty Tailstock
CUTMASTER BIG-JOE
KINGSTON HD-2690
Swing: 26" Distance: 90" Chuck: 20" 4 Jaw Chuck Swing Over Cross Slide: 17.5" Swing Gap: 35.1" Bed Width: 15 3/4" DRO: 2 Axis Newall DP700 Spindle Bore: 4-1/16" Spindle Taper: MT7, MT5 Spindle Moun...
LEBLOND REGAL
LeBlond Regal 26" x 132" Gap Bed Engine Lathe
LODGE & SHIPLEY RXE2516
Used LODGE & SHIPLEY RXE-2516 Precision Lathe (Used) Swing over carriage 26-1/2(673)、Swing over cross slide 20(508)、Center distance 120"(3048)、Pulley speed 845、spindle hole 65mm、4jaw chuck 550φ、mai...
LAGUN TURNMASTER HR-680X 1100G
Lagun American Turnmaster HR-680X 1100G Engine Lathe with DRO, Tailstock
AXELSON A20
27" X 226" Used Axelson Hollow Spindle Engine Lathe
STANKO 1M635
27.5"X 120" Stanko Heavy Duty Engine Lathe Model 1M635
STANKO 1M635
27.5"X 120" Stanko Heavy Duty Engine Lathe Model 1M635
TIMEMASTER SUPER M
27"x120"cc TIMEMASTER Engine Lathe
MONARCH 20CM
Catalog Size 20″ CM, Actual Swing 27.5″, Distance Between Centers 72″, Wired for 460V, Missing Carriage
STANKO 1M635
27.5"X 120" Stanko Heavy Duty Engine Lathe Model 1M635
HERCULES AJAX SPM710X4000
Hercules Model SPM710 Engine Lathe; New in (1997); Serial #1997486; Swing over Bed: 28"; Swing Over Cross Slide 17.71"; Center Distance: 157"; Working Diameter In Gap 37.9 "; Work Piece Length in G...
LANSING 28"-9 1/4"
Lightly used excellent condition inspect in service Delivery available
LANSING G-28 HOLLOW SPINDLE LATHE
28" x 180", Big Bore, Front and Rear Chuck, 9 ¼” hole in the work head 24” 4-Jaw chuck on front side; 19” 3-Jaw chuck on back side (2) retrofitted heavy duty steady rests Heavy duty tail stock with...
STANKO 1M63B
Contact Us Phone: 1(780) 434-0099 Email: Sales@stancanada.com
STANKO 1M63B
SPECIFICATIONS: 424 Serial: 4691 Mfg: 1991 Spindle Speed: 10 - 1250 rpm (6 Ranges) Spindle Bore: 3-3/8" Chuck: 4 Jaw Chuck - 20" Ø Swing: 28" Length: 120" Leadscrew: 2 tpi Steady Rest: 17" Ø Taper ...
STANKO 1M63B
Contact Us (780) 465-3667 sales@stancanada.com www.stancanada.com
WHACHEON HL720
2-Axis Sony DRO Rapid Traverse Thread Dial Extra Large Steady Rest 15" Buck Adjustable 3-Jaw chuck
ACER DYNAMIC 29120G
29" Swing 120" Centers Acer DYNAMIC 29120G ENGINE LATHE, Inch/Metri, 4" Hole, Taper, 2-Steady Rests,3&4 Jaw
VICTOR 2980T
29" X 80" Victor Gap Bed Engine Lathe With 4" Spindle Bore
ACER DYNAMIC 2960G
29" Swing 60" Centers Acer DYNAMIC 2960G ENGINE LATHE, Inch/Metric, Sony DRO, Taper, 3&4 Jaw, Steady, 15
GIUSEPPE GIANA 3280 GAP BED ENGINE LATHE
26" Swing, 80" Centers, 1280 RPM, 3.0" Bore, tailstock
KINGSTON HD-3000
KINGSTON 30 x 120" Removable Gap Bed Engine Lathe. Fully Installed in Shop Under Power for Inspection! Power Feeds, 2-Chucks Included 15" 4-Jaw, 12" 3-Jaw Top Condition!
KINGSTON HI-29120
Kingston 8.5" Hollow Spindle Engine Lathe, taper, threading
SOUTH BEND 750
30" x 108" SOUTH BEND ENGINE LATHE, Model 750, 30" Swing Over Bed, 28" Swing Over Cross Slide, 108" Centers, 21" 4-Jaw Chuck, 4" Thru Hole, Inch/Metric Threading, Steady Rest, New 1997. (2) Machine...
YAMAZAKI MAZAK-30
MONARCH 30" X 264"
Good running machine, came from a public utilites repair shop. Ways are in excellent condition. Can be seen under power. Free loading.
ACRA SET 32120
ACRA 3200 SET Precision Engine Lathe Swing 32 5/8" x 120" CC FEATURES: Series: 2800SET 3200SET 3600SET Swing Over Bed: ...
LEBLOND 32” STANDARD
34"x144"cc LEBLOND Engine Lathe
LEBLOND MAKINO HD3220
32" X 120" Used LeBlond Heavy Duty Engine Lathe
LEBLOND REGAL
32" x 240" Leblond Regal, 5.25" Spindle Hole, 8-1200 RPM, Inch Threading, 20 HP, #32216
MONARCH SERIES 80
Made in USA by the Monarch Machine Tool Company. Induction hardened ways; four-way rapid traverse. Condition is very good.
POREBA TPK 80 X 10M
TPK 80 /12000 lathe , under power , good condition , ready to use . Fully equipped .
STANKO 16K40-3
SPECIFICATIONS: 410 Chuck: 25" 4 Jaw Chuck (No Jaw) Swing: 34" Length: 140" Speed: 10 - 1250 rpm Serial #: 1171 Power: 220V, 3p, 65A Taper Attachment Lamp & Lubrication 40 Position Quick Change Too...
