ITEM JSL-42ABY

Main spindle max. turning diameter 42 mm
Sub spindle max. turning diameter 42 mm
Max. turning length Rotary guide bush:200  mm
Non guide bush:125
Main spindle max. drilling diameter 30 mm
Sub spindle max. drilling diameter 30 mm
Main spindle max. tapping diameter M16 mm
Sub spindle max. tapping diameter M16 mm
Max. cross drilling diameter 13 mm
Max. cross tapping diameter M10 mm
External tool holder 6 pcs
Inner tool holder 5 pcs
Cross drilling tool holder 4 (5) pcs
Sub spindle external tool holder 4 pcs
Sub spindle inner tool holder 3 pcs
Sub spindle cross drill tool holder 4 pcs
Sub spindle face drill tool holder 4 pcs
Tool size (LxWxH) 20 x 20 x 95 ~ 155 mm
Control axis C1/(C2)/X1/Y1/Z1/X2/Y2/Z2 pcs
Main spindle bore 58 mm
Main spindle speed 15 ~ 6000 rpm
Sub spindle bore 56 mm
Sub spindle speed 15 ~ 6000 rpm
X / Z / Y-axis rapid traverse 24 m / min
$1 cross drilling speed 4000 rpm
$2 face drilling speed 3000 rpm
Main spindle motor 7.5 (15) kw
Sub spindle motor 7.5 kw
X1 / Z1 motor 1.6 kw
Y1 motor 1.4 kw
$1 cross drilling motor 1.6 kw
X2 /Z2 motor 1.4 kw
Y2 motor 1.4 kw
$2 face drilling motor 1.6 kw
Hydraulic motor 0.75 kw
Coolant pump 2.3 x 2 pcs kw
Power requirement 40 kw
Lubrication capacity 2 L
Coolant tank capacity 480 L
Machine dimensions (LxWxH) 3380x2455x2155 mm
Weight 7500 kg

$1:System 1 (Main spindle system)
$2:System 2 (Sub spindle system)

Max. Turning Diameter 42mm.
Both guide bush / Non guide bush are available for making complicated components.
With hydraulic chuck system on main spindle, it accepted poor tolerance bar to save the material cost.
Deep hole drilling on sub spindle side with center cooling system. It has both fixed and rotary type.
The tooling system has two Y axis and Cs axis. Totally there are 37 tool holders and 19 of them are living tool.
Cross and face drilling function are available on main and sub spindle.
Built-in spindle with oil cooling system offers high efficiency, low noise and high accuracy environment.